Ford / New Holland Series 10 and Series 30 Tractor Service Manual
About this manual
This Ford / New Holland service manual covers workshop servicing and overhaul of Series 10 and Series 30 agricultural tractors. Its fourteen parts cover the engine, driveline, hydraulic and electrical systems, axles, cab and tractor separation procedures.
Manual details
- Manufacturer
- Ford / New Holland
- Manual type
- Service Manual
- Equipment type
- Tractor
- Models
- Series 10 and Series 30; see Manual scope for chapter-specific models.
- Document number
- 40001020 (compiled file reference); 40001020-1 on the Volume 1 cover dated 11/95.
- Text search
- Not available; image-based scan.
- PDF navigation
- PDF bookmarks
- Document quality
- Scanned PDF; sampled pages were readable. Full-document quality was not assessed.
Additional document information
- Publisher shown
- Ford New Holland, Inc.; New Holland-branded reprint
- Language
- English
- Format
- PDF, 2542 pages
- Organisation
- 14 parts; printed contents use volumes 1, 2A, 2B, 3, 4, 5 and 6
Manual scope
The foreword identifies three- and four-cylinder tractors and derivative models. Individual chapters specify the models and equipment to which they apply. The contents explicitly include Ford 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610 and 7710, with a separate derivative chapter for the 8210. This is a series-level reference, not a claim that every procedure applies to every listed tractor.
Systems and topics in this manual
Engine systems
Diesel and gasoline engine operation and overhaul, cooling-system work, troubleshooting, specifications and special tools.
Fuel systems
Gasoline and diesel fuel-system service, injection-pump adjustments, air cleaner, tanks, filters and fuel lines. The contents distinguish later fuel-system arrangements for certain De-Luxe Cab models.
Electrical systems
Wiring, lighting, switches and instrumentation, battery maintenance and tests, starting-system operation and component overhaul.
Clutches
Single and double clutches, adjustment and overhaul, together with pilot and release bearings, shaft bushings and pedal bushings.
Transmission systems
Model-specific transmission chapters include seven- and eight-speed non-synchromesh units, gear-shift components and transmission overhaul.
Power take-off
Transmission, live and independent PTO arrangements, pressure testing and overhaul of clutches, control valves, shafts and gears.
Rear axle and brakes
Rear axle shafts, wheel brakes, differentials and differential locks, drive pinions, handbrakes, brake linkage and adjustments.
Hydraulic systems
Hydraulic circuits and power lift, including arrangements with and without Load Monitor and low-pressure hydraulic systems.
Steering systems
Manual steering gears and power-assisted steering, including pump operation, pressure testing, reservoirs and hydraulic pipes.
Front axle
Model-specific rowcrop axle chapters cover adjustment, front-wheel spindles, radius rods, steering components and axle overhaul.
Safety cabs and platforms
Cab and platform construction, serviceability, tilting, removal and replacement. The contents distinguish earlier cabs from De-Luxe Cab arrangements.
Separating the tractor
Procedures for separating major assemblies at the engine, transmission and rear axle, with related specifications and special tools.
Accessories and general
Air-conditioning and cab-heating service, with separate treatment of equipment revisions and their service procedures.
Model derivatives
Dedicated material for highway, vineyard, narrow, orchard and rice tractor variants, plus a Ford 8210 chapter.
Manual contents
Chapter-level contents transcribed from the printed contents pages. Original volume assignments and chapter numbers are retained; individual procedure subsections are not reproduced.
Part 1: Engine Systems (Vol. 1)
- Diesel Engines (Chapter 1)
- Cooling System (Chapter 2)
- Gasoline Engines (Chapter 3)
- Trouble Shooting, Specifications and Special Tools (Chapter 4)
Part 2: Fuel Systems (Vol. 1)
- Fuel Systems - Gasoline (Chapter 1)
- Fuel Systems - Diesel (Chapter 2)
- Air Cleaners (Chapter 3)
- Injectors (Chapter 4)
- Fuel Injection Pump - Rotary Type (Chapter 5)
- Fuel Injection Pump - In-Line Type (Chapter 6)
- Turbocharger (Chapter 7)
- Trouble Shooting, Specifications, Test Plans and Special Tools (Chapter 8)
- Fuel Systems - Diesel Post Oct. 1985 Ford 5610, 6610 and 7610 with De-Luxe Cab (Chapter 9)
Part 3: Electrical Systems (Vol. 2A)
- Wiring, Lights, Switches and Instrumentation (Chapter 1)
- Battery (Chapter 2)
- Starting System (Chapter 3)
- Charging System - Alternator with Integral Regulator (Chapter 4)
- Charging System - Alternator with External Regulator (Chapter 5)
- Ignition System (Chapter 6)
- Trouble Shooting, Specifications, Special Tools and Wiring Diagrams (Chapter 7)
- Ford 5610, 6610, 7610, 7910 and 8210 with De-Luxe Cab; Ford 7710 and 8210 without Cab - Wiring and Electrical System Changes after October 1985 (Chapter 8)
Part 3: Electrical Systems (Vol. 2B)
- Charging System - 75 Amp Alternator with Integral Regulator - Ford 5610, 6610, 7610 and 7710 with De-Luxe Cab after October 1985 (Chapter 9)
- Electronic Instrument Panel (Chapter 10)
- Performance Monitor (Chapter 11)
- Charging System - A127 45/55 Amp Alternator with Integral Regulator - Ford 3 and 4 Tractors less Cab and with AP Cab after September 1987 and Ford 3 Cylinder 30 Series Tractors after March 1990 (Chapter 12)
- Ford 8210 with Electronic Draft Control (Chapter 13)
- Ford 3230, 3430, 3930, 4130 and 4630 from March 1990 (Chapter 14)
Part 4: Clutches (Vol. 3)
- Single Clutches (Chapter 1)
- Double Clutches (Chapter 2)
- Servicing Clutch Associated Parts (Chapter 3)
- Specifications and Special Tools (Chapter 4)
Part 5: Transmission Systems (Vol. 3)
- Eight Speed Non-Synchromesh Transmissions - Ford 2610, 3610, 4110 and 4610 (Chapter 1)
- Seven and Eight Speed Non-Synchromesh Transmission - Ford 5610, 6610, 6710, 7610 and 7710 (Chapter 2)
- Eight Speed Synchromesh Transmissions - Ford 2610, 3610, 4110 and 4610 (Chapter 3)
- Eight Speed Synchromesh Transmissions - Ford 5610, 6610, 6710, 7610 and 7710 (Chapter 4)
- Reduction Gearbox Assemblies (Chapter 5)
- Dual Power Transmissions - Ford 5610, 6610, 6710, 7610 and 7710 (Chapter 6)
- Trouble Shooting, Specifications and Special Tools (Chapter 7)
- ‘H’ Pattern Synchromesh Transmissions - Ford 2910, 3910, 4110 and 4610 (Chapter 8)
- ‘H’ Pattern Synchromesh Transmissions - Ford 5610, 6610 and 7610 (Chapter 9)
- Specifications and Special Tools for ‘H’ Pattern Synchromesh Transmissions (Chapter 10)
- Eight Speed Synchromesh Transmissions - Ford 5610, 6610, 7610, 7710, 7910 and 8210 with De-Luxe Cabs and Ford 7710 and 8210 less Cab (Chapter 11)
- Eight Speed Non-Synchromesh Transmissions - Ford 5610, 6610, 7610 and 7710 with De-Luxe Cab and Ford 7710 less Cab (Chapter 12)
Part 6: Power Take-Off (Vol. 3)
- Transmission P.T.O. and Live P.T.O. - Ford 2610 and 3610 (Chapter 1)
- Independent P.T.O. - Ford 4110 and 4610 (Chapter 2)
- Independent Power Take-Off - Ford 5610, 6610, 6710, 7610 and 7710 (Chapter 3)
- Trouble Shooting, Specifications and Special Tools (Chapter 4)
Part 7: Rear Axle & Brakes (Vol. 4)
- Rear Axle and Brakes - Ford 2600 and 3600, 2610 and 3610 (Chapter 1)
- Rear Axle and Brakes - Ford 4100–7700, 2810–8210, and 3230–4830 (Chapter 2)
- Specifications and Special Tools (Chapter 3)
Part 8: Hydraulic Systems (Vol. 4)
- Hydraulic System Circuits (Chapter 1)
- Hydraulic Power Lift (Chapter 2)
- Hydraulic Lift Cylinder Assemblies and Priority Valve Packs (Chapter 3)
- Hydraulic Lift Cover Assemblies (Chapter 4)
- Flow Control Valve Plate and Linkage (Chapter 5)
- Oil Filter Support Assembly (Chapter 6)
- Oil Cooler and Oil Cooler Valve Assembly (Chapter 7)
- Load Monitor (Chapter 8)
- Hydraulic Pumps (Chapter 9)
- Hydraulic Lift External Control Linkage (Chapter 10)
- Adjustments (Chapter 11)
- Trouble Shooting, Pressure Testing, Specifications and Special Tools - Ford 2610, 3610, 4110, 4610, 5610, 6600, 6710, 7610 & 7710 Models (Chapter 12)
- Ford 8210 with Electronic Draft Control (Chapter 13)
Part 9: Steering Systems (Vol. 4)
- Double Drop Arm Manual Steering Gear - Ford 2610, 3610 and 4110 less Cab - Up to December 1984 (Chapter 1)
- Single Drop Arm Steering Gear - Ford 2610, 3610 and 4110 with Cab and Ford 4610, 5610, 6610 and 7610 (Chapter 2)
- Power Assisted Steering Pump, Reservoir and Pipes - All Models (Chapter 3)
- Double Drop Arm Power Assisted Steering - Ford 2610, 3610 and 4110 less Cab (Chapter 4)
- Single Drop Arm Power Assisted Steering (Integral Unit) - Ford 2610, 3610 and 4110 with Cab and Ford 4610, 5610, 6610 and 7610 (Chapter 5)
- Hydrostatic Steering System - Ford 6710 and 7710 (Chapter 6)
- Trouble Shooting, Specifications and Special Tools (Chapter 7)
- Double Drop Arm Manual and Power Assisted Steering Gear Assemblies - Ford 2910, 3910 and 4110 less Four Wheel Drive - January 1985 Onwards (Chapter 8)
- Hydrostatic Steering System - Ford 5610, 6610 and 7610 (Chapter 9)
Part 10: Front Axle (Vol. 5)
- Rowcrop Axle - Ford 2610, 3610 and 4110 (Chapter 1)
- Rowcrop Axle - Ford 4610 (Chapter 2)
- Rowcrop Axle - Ford 5610, 6610 and 7610 (Chapter 3)
- Rowcrop Axle - Ford 6710, 7710, 7910 and 8210 (Chapter 4)
- Front Wheel Drive Transfer Box - Ford 2610, 3610, 4110 and 4610 with AE1-149, AE1-169 and AE2-169 Type Axles (Chapter 5)
- Front Wheel Drive Axle Assembly - Ford 2610, 3610, 4110 and 4610 with AE1-149, AE1-169 and AE2-169 Type Axles (Chapter 6)
- Front Wheel Drive Transfer Box - Ford 5610, 6610, 6710, 7610, 7710, 7910 and 8210 with APL 325 Front Axle Assembly (Chapter 7)
- Front Wheel Drive Axle Assembly - Ford 5610, 6610, 6710, 7610, 7710, 7910 and 8210 with APL325 Front Axle Assembly (Chapter 8)
- Specifications and Special Tools (Refer also to Chapter 12 and Chapter 15) (Chapter 9)
- Front Wheel Drive Transfer Box - Ford 5610, 6610, 6710, 7610, 7710, 7910 and 8210 with APL 335, 345 or 350 Type Axles (Chapter 10)
- Front Wheel Drive Axle Assemblies - Ford 5610, 6610, 6710, 7610, 7710, 7910 and 8210 with APL 335, 345 or 350 Type Axles (Chapter 11)
- Specifications and Special Tools for Ford 5610, 6610, 6710, 7710, 7910 and 8210 with APL 335, 345 and 350 Axles and Associated Transfer Boxes (Chapter 12)
- Front Wheel Drive Transfer Box - Ford 2910, 3910, 4110 and 4610 with AE1-159 Type Axle (Chapter 13)
- Front Wheel Drive Assembly - Ford 2910, 3910, 4110 and 4610 with AE1-159 Type Axle (Chapter 14)
- Specifications and Special Tools for Ford 2910, 3910, 4110, and 4610 with AE1-159 Type Axle and Associated Transfer Box (Chapter 15)
Part 11: Ford Tractor Safety Cabs and Platforms (Vol. 5)
- Ford Tractor Safety Cabs and Platforms Prior to October 1985 - Description and Serviceability (Chapter 1)
- Ford Tractor Safety Cabs and Platforms Prior to October 1985 - Removal and Replacement (Chapter 2)
- Ford Tractor Safety Cabs Prior to October 1985 - Overhaul (Chapter 3)
- Specifications and Special Tools Prior to October 1985 (Chapter 4)
- Ford Tractor Safety Cabs Post October 1985 (Chapter 5)
- Ford Tractor Platforms Post October 1985 (Chapter 6)
Part 12: Separating the Tractor (Vol. 6)
- Separating the Tractor - Ford 2600 and 3600 (Chapter 1)
- Separating the Tractor - Ford 4100, 4600, 5600, 6600, 6700, 7600 and 7700 (Chapter 2)
- Specifications and Special Tools (Chapter 3)
Part 13: Accessories and General (Vol. 6)
- Air Conditioning Systems - Tractors Prior to October 1985 (Chapter 1)
- Cab Heating System - Tractors Prior to October 1985 (Chapter 2)
- Remote Control Valves (Chapter 3)
- Hydraulic Trailer Brake Valve (Chapter 4)
- Air Conditioning Systems - Tractors Post October 1985 (Chapter 5)
- Cab Heating Systems - Tractors Post October 1985 (Chapter 6)
- Air Conditioning Compressor Post January 1989 (Chapter 7)
Part 14: Model Derivatives (Vol. 6)
- Ford 234 and 334 Highway Tractors (Chapter 1)
- Ford 2610 Vineyard, Ford 3610 Vineyard and Ford 3610 Narrow Tractors (Chapter 2)
- Ford 3910 Rice Tractor (Chapter 3)
- Ford 4110, 4610 Narrow and Narrow Orchard Tractors (Chapter 4)
- Ford 8210 Tractor (Chapter 5)
Technical reference information
The introductory pages explain tractor production codes, serial-number identification and fuel-injection-pump date codes. Model-specific chapter headings and equipment notes should be checked before selecting a procedure.
PDF format and navigation
This is a scanned PDF. Use its bookmarks and printed contents rather than relying on full-text search. The description does not claim that every original volume page has been audited.
No questions found.