Kubota L2800/L3400 Workshop Manual | 9Y011-13193

About this manual

For the L2800 and L3400 tractors, this OEM Kubota Workshop Manual brings the documented workshop information together in a PDF reference. System explanations sit alongside servicing instructions, including troubleshooting, checks and adjustments, and disassembly and assembly.

The document is organised into General, Mechanism, and Servicing sections, covering reference information and workshop procedures. Find the relevant section through Manual contents; Manual details identifies the models and publication information.

Manual details

Manufacturer

Kubota

Manual type

Workshop Manual

Equipment type

Tractor

Models

L2800 and L3400

Document number

9Y011-13193

KiSC issue / revision

August 2007 (A)

Text search

Available

PDF navigation

PDF bookmarks

Document quality

High — clear, readable text, illustrations and diagrams.

Product highlights

Electrical systems

The manual includes wiring diagrams and electrical troubleshooting.

Hydraulic systems

The manual includes hydraulic valve-adjustment material.

Specifications and settings

The manual includes reference information for wear limits and dimensions.

Special tools

A special-tools section is included.

Maintenance

The manual includes a maintenance schedule.

Applicability and limitations

For mechanism information not described in this manual, the reader refers to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9Y021-01874 / 9Y021-18201).

Manual contents

Use these source headings to locate the task or system you need in the PDF.

• TO THE READER — p. 2
• G GENERAL — p. 16
  • GENERAL — p. 17
    • TRACTOR IDENTIFICATION — p. G-1
    • GENERAL PRECAUTIONS — p. G-2
    • HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING — p. G-3
      • [1] WIRING — p. G-3
      • [2] BATTERY — p. G-5
      • [3] FUSE — p. G-5
      • [4] CONNECTOR — p. G-5
    • LUBRICANTS, FUEL AND COOLANT — p. G-7
    • TIGHTENING TORQUES — p. G-9
      • [1] GENERAL USE SCREWS, BOLTS AND NUTS — p. G-9
    • MAINTENANCE — p. G-10
    • CHECK AND MAINTENANCE — p. G-13
      • [1] DAILY CHECK — p. G-13
      • [2] CHECK POINTS OF INITIAL 50 HOURS — p. G-14
      • [3] CHECK POINTS OF EVERY 50 HOURS — p. G-21
      • [4] CHECK POINTS OF EVERY 100 HOURS — p. G-25
      • [5] CHECK POINTS OF EVERY 200 HOURS — p. G-30
      • [6] CHECK POINTS OF EVERY 400 HOURS — p. G-32
      • [7] CHECK POINTS OF EVERY 600 HOURS — p. G-33
      • [8] CHECK POINTS OF EVERY 800 HOURS — p. G-33
      • [9] CHECK POINTS OF EVERY 1500 HOURS — p. G-33
      • [10]CHECK POINTS OF EVERY 3000 HOURS — p. G-33
      • [11]CHECK POINTS OF EVERY 1 YEARS — p. G-33
      • [12]CHECK POINTS OF EVERY 2 YEARS — p. G-34
      • [13]OTHERS — p. G-38
    • SPECIAL TOOLS — p. G-40
      • [1] SPECIAL TOOLS FOR ENGINE — p. G-40
      • [2] SPECIAL TOOLS FOR TRACTOR — p. G-46
    • TIRES — p. G-55
      • [1] TIRE PRESSURE — p. G-55
      • [2] TREADS ADJUSTMENT — p. G-56
      • [3] TIRE LIQUID INJECTION — p. G-58
      • [4] IMPLEMENT LIMITATIONS — p. G-62
• 1 ENGINE — p. 81
  • MECHANISM — p. 82
    • FEATURES — p. 1-M1
    • FUEL SYSTEM — p. 1-M2
    • LUBRICATING SYSTEM — p. 1-M3
    • COOLING SYSTEM — p. 1-M4
  • SERVICING — p. 87
    • TROUBLESHOOTING — p. 1-S1
    • SERVICING SPECIFICATIONS — p. 1-S4
    • TIGHTENING TORQUES — p. 1-S10
    • CHECKING, DISASSEMBLING AND SERVICING — p. 1-S11
      • [1] CHECKING AND ADJUSTING — p. 1-S11
      • [2] PREPARATION — p. 1-S19
      • [3] DISASSEMBLING AND ASSEMBLING — p. 1-S25
      • [4] SERVICING — p. 1-S41
• 2 CLUTCH — p. 149
  • MECHANISM — p. 150
    • STRUCTURE — p. 2-M1
  • SERVICING — p. 152
    • TROUBLESHOOTING — p. 2-S1
    • SERVICING SPECIFICATIONS — p. 2-S3
    • TIGHTENING TORQUES — p. 2-S5
    • CHECKING, DISASSEMBLING AND SERVICING — p. 2-S6
      • [1] CHECKING AND ADJUSTING — p. 2-S6
      • [2] PREPARATION — p. 2-S7
      • [3] DISASSEMBLING AND ASSEMBLING — p. 2-S12
      • [4] SERVICING — p. 2-S13
• 3 TRANSMISSION (MANUAL TYPE) — p. 169
  • MECHANISM — p. 170
    • STRUCTURE — p. 3-M1
      • [1] L2800 — p. 3-M1
      • [2] L3400 — p. 3-M2
  • SERVICING — p. 173
    • TROUBLESHOOTING — p. 3-S1
    • SERVICING SPECIFICATIONS — p. 3-S3
    • TIGHTENING TORQUES — p. 3-S5
    • CHECKING, DISASSEMBLING AND SERVICING — p. 3-S6
      • [1] PREPARATION — p. 3-S6
      • [2] DISASSEMBLING AND ASSEMBLING — p. 3-S14
      • [3] SERVICING — p. 3-S29
• H3 TRANSMISSION (HST TYPE) — p. 209
  • MECHANISM — p. 210
    • STRUCTURE — p. H3-M1
    • POWER TRAIN FOR TRAVELLING — p. H3-M2
      • [1] HYDRAULIC TRANSMISSION (HST) — p. H3-M2
      • [2] OIL FLOW — p. H3-M4
      • [3] OPERATION — p. H3-M5
      • [4] CONTROL LINKAGE — p. H3-M8
      • [5] RANGE GEAR SHIFT SECTION — p. H3-M10
      • [6] FRONT DRIVE WHEEL SECTION — p. H3-M10
    • POWER TRAIN FOR PTO — p. H3-M11
      • [1] STRUCTURE — p. H3-M11
      • [2] SHIFTING LINKAGE — p. H3-M12
  • SERVICING — p. 223
    • TROUBLESHOOTING — p. H3-S1
    • SERVICING SPECIFICATIONS — p. H3-S5
    • TIGHTENING TORQUES — p. H3-S6
    • CHECKING, DISASSEMBLING AND SERVICING — p. H3-S7
      • [1] CHECKING AND ADJUSTING — p. H3-S7
      • [2] PREPARATION — p. H3-S12
      • [3] DISASSEMBLING AND ASSEMBLING — p. H3-S18
      • [4] SERVICING — p. H3-S26
• 4 REAR AXLE — p. 252
  • MECHANISM — p. 253
    • STRUCTURE — p. 4-M1
  • SERVICING — p. 255
    • TROUBLESHOOTING — p. 4-S1
    • TIGHTENING TORQUES — p. 4-S2
    • DISASSEMBLING AND SERVICING — p. 4-S3
      • [1] PREPARATION — p. 4-S3
      • [2] DISASSEMBLING REAR AXLE — p. 4-S5
      • [3] SERVICING — p. 4-S5
• 5 BRAKES — p. 261
  • MECHANISM — p. 262
    • FEATURES — p. 5-M1
    • OPERATION — p. 5-M2
  • SERVICING — p. 265
    • TROUBLESHOOTING — p. 5-S1
    • SERVICING SPECIFICATIONS — p. 5-S2
    • TIGHTENING TORQUES — p. 5-S3
    • CHECKING, DISASSEMBLING AND SERVICING — p. 5-S4
      • [1] CHECKING AND ADJUSTING — p. 5-S4
      • [2] PREPARATION — p. 5-S5
      • [3] DISASSEMBLING AND ASSEMBLING — p. 5-S7
      • [4] SERVICING — p. 5-S8
• 6 FRONT AXLE — p. 275
  • MECHANISM — p. 276
    • STRUCTURE — p. 6-M1
      • [1] 2WD TYPE — p. 6-M1
      • [2] 4WD TYPE — p. 6-M2
  • SERVICING — p. 279
    • TROUBLESHOOTING — p. 6-S1
    • SERVICING SPECIFICATIONS — p. 6-S2
    • TIGHTENING TORQUES — p. 6-S5
    • CHECKING, DISASSEMBLING AND SERVICING — p. 6-S6
      • [1] CHECKING AND ADJUSTING — p. 6-S6
      • [2] PREPARATION — p. 6-S8
      • [3] DISASSEMBLING AND ASSEMBLING — p. 6-S11
      • [4] SERVICING — p. 6-S17
• 7 STEERING — p. 302
  • MECHANISM — p. 303
    • LUBRICATING SYSTEM — p. 7-M1
      • [1] LINKAGE — p. 7-M1
      • [2] STEERING GEAR BOX — p. 7-M2
  • SERVICING — p. 308
    • TROUBLESHOOTING — p. 7-S1
    • SERVICING SPECIFICATIONS — p. 7-S2
    • TIGHTENING TORQUES — p. 7-S3
    • CHECKING, DISASSEMBLING AND SERVICING — p. 7-S4
      • [1] CHECKING AND ADJUSTING — p. 7-S4
      • [2] PREPARATION — p. 7-S4
      • [3] DISASSEMBLING AND ASSEMBLING — p. 7-S6
      • [4] SERVICING — p. 7-S8
• 8 HYDRAULIC SYSTEM — p. 318
  • MECHANISM — p. 319
    • HYDRAULIC CIRCUIT — p. 8-M1
    • HYDRAULIC CYLINDER — p. 8-M2
    • LINKAGE MECHANISM — p. 8-M3
    • FRONT HYDRAULIC BLOCK — p. 8-M5
  • SERVICING — p. 325
    • TROUBLESHOOTING — p. 8-S1
    • SERVICING SPECIFICATIONS — p. 8-S2
    • TIGHTENING TORQUES — p. 8-S5
    • CHECKING, DISASSEMBLING AND ASSEMBLING — p. 8-S6
      • [1] CHECKING AND ADJUSTING — p. 8-S6
      • [2] DISASSEMBLING AND ASSEMBLING — p. 8-S13
      • [3] SERVICING — p. 8-S21
• 9 ELECTRICAL SYSTEM — p. 350
  • MECHANISM — p. 351
    • WIRING DIAGRAM — p. 9-M1
    • OPERATOR PRESENCE CONTROL — p. 9-M3
  • SERVICING — p. 355
    • TROUBLESHOOTING — p. 9-S1
    • SERVICING SPECIFICATIONS — p. 9-S5
    • TIGHTENING TORQUES — p. 9-S6
    • CHECKING, DISASSEMBLING AND SERVICING — p. 9-S7
      • [1] CHECKING AND ADJUSTING — p. 9-S7
      • [2] DISASSEMBLING AND ASSEMBLING — p. 9-S22
      • [3] SERVICING — p. 9-S25

Capabilities

The source outline separates mechanism explanations from servicing instructions for Engine, Clutch, Transmission (Manual Type), H3 Transmission (Hst Type), Rear Axle, Brakes, Front Axle, Steering, Hydraulic System, and Electrical System. Use these indexed headings to locate the applicable system in the source PDF, then confirm model-specific notes, specifications, illustrations, and operating conditions at the relevant page before carrying out service work.

Keep the source's safety sequence, prerequisite steps, labels, units, configuration notes, and footnotes with the selected task; do not apply an isolated value outside the conditions stated in the manual.

Technical reference

Reference tables include wear limits and dimensions for service checks, adjustment work, and specification lookup. Use the values and conditions in the PDF for the applicable model and procedure.

• Service limits and settings: wear limits.
• Machine specifications: dimensions.

Delivery

This manual is supplied as a digital PDF file and is available for instant download after purchase. No physical media is shipped.

References

Kubota Workshop Manual for Tractor, document code 9Y011-13193, PDF edition.