About this manual
For the RTV900 utility vehicle, this OEM Kubota Workshop Manual brings the documented workshop information together in a PDF reference. System explanations sit alongside servicing instructions, including troubleshooting, checks and adjustments, and disassembly and assembly.
The document is organised into General, Mechanism, and Servicing sections, covering reference information and workshop procedures. Find the relevant section through Manual contents; Manual details identifies the models and publication information.
Manual details
- Manufacturer
- Kubota
- Manual type
- Workshop Manual
- Equipment type
- Utility Vehicle
- Models
- RTV900
- Document number
- 9Y011-15305
- KiSC issue / revision
- March 2008 (A)
- Text search
- Available
- PDF navigation
- PDF bookmarks
- Document quality
- High — clear, readable text, illustrations and diagrams.
Product highlights
Electrical systems
The manual includes wiring diagrams and electrical troubleshooting.
Hydraulic systems
The manual includes hydraulic valve-adjustment material.
Specifications and settings
The manual includes reference information for torque specifications, wear limits, dimensions, and speed ratings.
Special tools
A special-tools section is included.
Maintenance
The manual includes a maintenance schedule.
Applicability and limitations
For mechanism information not described in this manual, the reader refers to Diesel Engine Workshop Manual (Code No. 9Y021-01872).
Manual contents
Use these source headings to locate the task or system you need in the PDF.
- GENERAL — p. 17
- PRODUCT IDENTIFICATION — p. G-1
- GENERAL PRECAUTIONS — p. G-2
- HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING — p. G-3
- [1] WIRING — p. G-3
- [2] BATTERY — p. G-5
- [3] FUSE — p. G-5
- [4] CONNECTOR — p. G-5
- [5] HANDLING OF CIRCUIT TESTER — p. G-7
- TIGHTENING TORQUES — p. G-11
- [1] GENERAL USE SCREWS, BOLTS AND NUTS — p. G-11
- [2] STUD BOLTS — p. G-11
- [3] METRIC SCREWS, BOLTS AND NUTS — p. G-12
- OR UNF THREADS — p. G-12
- [5] PLUGS — p. G-12
- MAINTENANCE CHECK LIST — p. G-13
- [1] FROM FIRST 50 HOURS TO EVERY 550 HOURS — p. G-13
- [2] FROM EVERY 600 HOURS TO EVERY 4 YEARS — p. G-15
- CHECK AND MAINTENANCE — p. G-17
- [1] DAILY CHECK — p. G-17
- [2] CHECK POINTS OF INITIAL 50 HOURS — p. G-23
- [3] CHECK POINTS OF EVERY 50 HOURS — p. G-30
- [4] CHECK POINTS OF EVERY 100 HOURS — p. G-32
- [5] CHECK POINTS OF EVERY 200 HOURS — p. G-38
- [7] CHECK POINTS OF EVERY 400 HOURS — p. G-42
- [8] CHECK POINT OF EVERY 500 HOURS — p. G-42
- [9] CHECK POINT OF EVERY 800 HOURS — p. G-42
- [10]CHECK POINT OF EVERY 1500 HOURS — p. G-42
- [11]CHECK POINT OF EVERY 3000 HOURS — p. G-43
- [12]CHECK POINT OF EVERY 1 YEAR — p. G-43
- [13]CHECK POINTS OF EVERY 2 YEARS — p. G-43
- SPECIAL TOOLS — p. G-49
- [1] SPECIAL TOOLS FOR ENGINE — p. G-49
- [2] SPECIAL TOOLS FOR TRACTOR — p. G-53
- TIRES — p. G-59
- [1] TYPE OF TIRE — p. G-60
- [2] TYPE PRESSURE — p. G-61
- [3] VEHICLE LIMITATIONS — p. G-61
- [4] CARGO BED — p. G-62
- MECHANISM — p. 81
- ENGINE BODY — p. 1-M1
- [1] HALF-FLOATING HEAD COVER — p. 1-M1
- [2] GEAR CASE — p. 1-M1
- [3] OIL PAN — p. 1-M2
- LUBRICATING SYSTEM — p. 1-M3
- COOLING SYSTEM — p. 1-M4
- FUEL SYSTEM — p. 1-M5
- SERVICING — p. 87
- TROUBLESHOOTING — p. 1-S1
- SERVICING SPECIFICATIONS — p. 1-S4
- TIGHTENING TORQUES — p. 1-S9
- CHECKING, DISASSEMBLING AND SERVICING — p. 1-S10
- [1] CHECKING AND ADJUSTING — p. 1-S10
- (1) Engine Body — p. 1-S10
- (2) Lubricating System — p. 1-S13
- (3) Cooling System — p. 1-S13
- [2] PREPARATION — p. 1-S18
- (1) Removing Battery — p. 1-S18
- (2) Separating Radiator — p. 1-S18
- (3) Separating Fuel Tank — p. 1-S19
- (4) Separating Engine — p. 1-S20
- [3] DISASSEMBLING AND ASSEMBLING — p. 1-S21
- (1) Cylinder Head and Valves — p. 1-S21
- (2) Oil Pan, Timing Gears, Camshaft and Fuel Camshaft — p. 1-S25
- (3) Pistons and Connecting Rods — p. 1-S29
- (4) Crankshaft — p. 1-S31
- (5) Water Pump — p. 1-S34
- [4] SERVICING — p. 1-S35
- (2) Oil Pan, Timing Gear and Camshaft — p. 1-S42
- (3) Piston and Connecting Rod — p. 1-S43
- (4) Crankshaft — p. 1-S47
- (5) Cylinder — p. 1-S52
- (6) Oil Pump — p. 1-S53
- MECHANISM — p. 142
- STRUCTURE — p. 2-M1
- POWER TRAIN — p. 2-M2
- [1] HYDROSTATIC TRANSMISSION (HST) — p. 2-M2
- (1) Structure — p. 2-M2
- (2) Oil Flow — p. 2-M4
- (3) Function of Components — p. 2-M5
- SECTION — p. 2-M20
- SERVICING — p. 163
- TROUBLESHOOTING — p. 2-S1
- SERVICING SPECIFICATIONS — p. 2-S4
- TIGHTENING TORQUES — p. 2-S5
- CHECKING — p. 2-S6
- [1] DISASSEMBLING HYDROSTATIC TRANSMISSION — p. 2-S17
- [2] DISMOUNTING TRANSAXLE — p. 2-S21
- (1) Front Case — p. 2-S28
- SERVICING — p. 2-S38
- MECHANISM — p. 212
- STRUCTURE — p. 3-M1
- SERVICING — p. 214
- TROUBLESHOOTING — p. 3-S1
- TIGHTENING TORQUES — p. 3-S2
- CHECKING, DISASSEMBLING AND SERVICING — p. 3-S3
- [1] DISASSEMBLING AND ASSEMBLING — p. 3-S3
- [2] SERVICING — p. 3-S6
- MECHANISM — p. 223
- GENERAL OUTLINE — p. 4-M1
- KNUCKLE (FRONT BRAKE) — p. 4-M2
- REAR BRAKE — p. 4-M3
- MASTER CYLINDER — p. 4-M4
- BRAKE OIL — p. 4-M5
- PARKING BRAKE — p. 4-M6
- SERVICING — p. 230
- TROUBLESHOOTING — p. 4-S1
- SERVICING SPECIFICATIONS — p. 4-S2
- TIGHTENING TORQUES — p. 4-S3
- [1] CHECKING AND ADJUSTING — p. 4-S4
- [2] SERVICING — p. 10-S1
- SERVICING — p. 471
- CHECKING AND ADJUSTING — p. 10-S1
- DISASSEMBLING AND ASSEMBLING — p. 10-S2
- [1] DISMOUNTING TRANSAXLE — p. 10-S2
Capabilities
The source outline indexes checking and adjustment, maintenance tasks, mechanism explanations, servicing instructions, troubleshooting, and disassembly and assembly. Use these source-backed headings to locate the applicable task or system in the source PDF, then confirm model-specific notes, specifications, illustrations, and operating conditions at the relevant page before carrying out service work.
Keep the source's safety sequence, prerequisite steps, labels, units, configuration notes, and footnotes with the selected task; do not apply an isolated value outside the conditions stated in the manual.
Technical reference
Reference tables include torque settings, wear limits, dimensions, and speed ratings for service checks, adjustment work, and specification lookup. Use the values and conditions in the PDF for the applicable model and procedure.
- Service limits and settings: torque settings and wear limits.
- Machine specifications: dimensions and speed ratings.
Delivery
This manual is supplied as a digital PDF file and is available for instant download after purchase. No physical media is shipped.
References
Kubota Workshop Manual for Utility Vehicle, document code 9Y011-15305, PDF edition.
No questions found.