Kubota ZD326-EU, ZD326-60-EU, ZD326-60R-EU, and ZD326-60P-EU Workshop Manual — 9Y111-03011

About this manual

Kubota published this Workshop Manual for the ZD326-EU, ZD326-60-EU, ZD326-60R-EU, and ZD326-60P-EU mower models. It brings the documented service and technical-reference material for those named mowers into a single publication.

The manual is especially useful for work that crosses electrical and hydraulic systems: it includes electrical troubleshooting with connector views and pinouts, alongside hydraulic diagrams, pressure-test evidence, and valve-adjustment information.

Use the Manual Contents below to check that the exact repair, inspection, or maintenance procedure you need is included in this publication.

Manual details

Manufacturer

Kubota

Manual type

Workshop Manual

Models

ZD326-EU, ZD326-60-EU, ZD326-60R-EU, and ZD326-60P-EU

Document number

9Y111-03011

Language

English

Page count

268

Product highlights

Manual contents

Use these source headings to locate the task or system you need in the PDF.

• TO THE READER — p. 1
• I INFORMATION — p. 2
  • INFORMATION — p. 3
    • 1. SAFETY FIRST — p. 4
    • 2. SAFETY DECALS — p. 7
    • 3. SPECIFICATIONS — p. 11
    • 4. DIMENSIONS — p. 13
• G GENERAL — p. 15
  • GENERAL — p. 16
    • 1. IDENTIFICATION — p. 17
      • [1] MODEL NAME AND SERIAL NUMBER — p. 17
      • [2] CYLINDER NUMBER — p. 18
    • 2. GENERAL PRECAUTIONS — p. 19
    • 3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING — p. 20
      • [1] WIRING — p. 20
      • [2] BATTERY — p. 22
      • [3] FUSE — p. 22
      • [4] CONNECTOR — p. 22
      • [5] HANDLING OF CIRCUIT TESTER — p. 23
      • [6] COLOR OF WIRING — p. 24
    • 4. LUBRICANT, FUEL AND COOLANT — p. 25
    • 5. TIGHTENING TORQUES — p. 27
      • [1] GENERAL USE SCREWS, BOLTS AND NUTS — p. 27
      • [2] STUD BOLTS — p. 27
      • [3] METRIC SCREWS, BOLTS AND NUTS — p. 28
      • [4] AMERICAN STANDARD SCREWS, BOLTS AND NUTS WITH UNC OR UNF THREADS — p. 28
      • [5] PLUGS — p. 28
    • 6. MAINTENANCE CHECK LIST — p. 29
    • 7. PERIODIC SERVICE CHART LABEL — p. 31
    • 8. CHECK AND MAINTENANCE — p. 32
      • [1] DAILY CHECK — p. 32
      • [2] CHECK POINTS OF INITIAL 50 HOURS — p. 37
      • [3] CHECK POINT OF INITIAL 100 HOURS — p. 38
      • [4] CHECK POINTS OF EVERY 50 HOURS — p. 39
      • [5] CHECK POINTS OF EVERY 100 HOURS — p. 43
      • [6] CHECK POINTS OF EVERY 150 HOURS — p. 47
      • [7] CHECK POINTS OF EVERY 200 HOURS — p. 47
      • [8] CHECK POINT OF EVERY 400 HOURS — p. 49
      • [9] CHECK POINTS OF EVERY 1500 HOURS — p. 50
      • [10] CHECK POINTS OF EVERY 3000 HOURS — p. 50
      • [11] CHECK POINTS OF EVERY 1 YEAR — p. 51
      • [12] CHECK POINT OF EVERY 2 YEARS — p. 54
      • [13] SERVICE AS REQUIRED — p. 55
    • 9. SPECIAL TOOLS — p. 58
      • [1] SPECIAL TOOLS FOR ENGINE — p. 58
      • [2] SPECIAL TOOLS FOR MACHINE — p. 64
    • 10. IMPLEMENT LIMITATIONS — p. 65
• 1 ENGINE — p. 66
  • SERVICING — p. 67
    • 1. TROUBLESHOOTING — p. 68
    • 2. SERVICING SPECIFICATIONS — p. 71
    • 3. TIGHTENING TORQUES — p. 76
    • 4. CHECKING, DISASSEMBLING AND SERVICING — p. 77
      • [1] CHECKING AND ADJUSTING — p. 77
        • (1) Engine Body — p. 77
        • (2) Lubricating System — p. 79
        • (3) Cooling System — p. 79
        • (4) Fuel System — p. 82
      • [2] SEPARATING ENGINE — p. 86
      • [3] DISASSEMBLING AND ASSEMBLING — p. 90
        • (1) Cylinder Head and Valve — p. 90
        • (2) Gear Case and Timing Gears — p. 94
        • (3) Piston and Connecting Rod — p. 97
        • (4) Flywheel and Crankshaft — p. 100
      • [4] SERVICING — p. 103
        • (1) Cylinder Head and Valves — p. 103
        • (2) Timing Gears, Camshaft and Governor Gear — p. 108
        • (3) Piston and Connecting Rod — p. 111
        • (4) Crankshaft — p. 113
        • (5) Cylinder — p. 117
        • (6) Oil Pump — p. 118
• 2 TRANSAXLE — p. 119
  • MECHANISM — p. 120
    • 1. STRUCTURE — p. 121
    • 2. TRAVELING SYSTEM — p. 122
      • [1] HYDROSTATIC TRANSMISSION — p. 122
        • (1) Structure — p. 122
        • (2) Check and High Pressure Relief Valve — p. 123
        • (3) Oil Flow — p. 124
        • (4) Power Trains Operation — p. 125
        • (5) Control Linkage — p. 126
        • (6) Final Reduction Gear Section — p. 127
        • (7) Hydraulic Pump — p. 127
        • (8) PTO System — p. 128
        • (9) Parking Brake — p. 131
  • SERVICING — p. 132
    • 1. TROUBLESHOOTING — p. 133
    • 2. SERVICING SPECIFICATIONS — p. 135
    • 3. TIGHTEINIG TORQUES — p. 136
    • 4. CHECKING AND ADJUSTING — p. 137
    • 5. DISASSEMBLING AND ASSEMBLING — p. 146
      • [1] SEPARATING TRANSAXLE ASSEMBLY — p. 146
      • [2] DISASSEMBLING TRANSAXLE CENTER CASE — p. 152
      • [3] DISASSEMBLING PTO CLUTCH SHAFT ASSEMBLY — p. 154
      • [4] DISASSEMBLING HYDROSTATIC TRANSMISSION AND REAR AXLE GEAR CASE ASSEMBLY — p. 160
      • [5] DISASSEMBLING REAR AXLE GEAR CASE — p. 165
    • 6. SERVICING — p. 169
      • [1] HYDROSTATIC TRANSMISSION — p. 169
      • [2] TRANSMISSION CASE — p. 171
      • [3] PTO CLUTCH — p. 173
      • [4] BRAKE — p. 173
• 3 FRONT AXLE — p. 174
  • MECHANISM — p. 175
    • 1. STRUCTURE — p. 176
  • SERVICING — p. 177
    • 1. TROUBLESHOOTING — p. 178
    • 2. SERVICING SPECIFICATIONS — p. 179
    • 3. TIGHTENING TORQUES — p. 180
    • 4. CHECKING, DISASSEMBLING AND SERVICING — p. 181
      • [1] CHECKING AND ADJUSTING — p. 181
      • [2] DISASSEMBLING AND ASSEMBLING — p. 182
        • (1) Separating Front Wheel and Wheel Bracket — p. 182
        • (2) Separating Front Axle Assembly — p. 183
• 4 HYDRAULIC SYSTEM — p. 185
  • MECHANISM — p. 186
    • 1. HYDRAULIC CIRCUIT — p. 187
    • 2. HYDRAULIC PUMP — p. 188
    • 3. HYDRAULIC CONTROL VALVE — p. 189
      • [1] OPERATION — p. 190
    • 4. LIFT CYLINDER — p. 192
    • 5. MOWER LINKAGE — p. 193
  • SERVICING — p. 194
    • 1. TROUBLESHOOTING — p. 195
    • 2. SERVICING SPECIFICATIONS — p. 196
    • 3. TIGHTENING TORQUES — p. 197
    • 4. CHECKING, DISASSEMBLING AND SERVICING — p. 198
      • [1] HYDRAULIC CONTROL VALVE, PUMP AND CYLINDER — p. 198
        • (1) Checking and Adjusting — p. 198
        • (2) Disassembling and Assembling the Hydraulic Control Valve — p. 199
        • (3) Disassembling and Assembling the Hydraulic Pump — p. 203
      • [2] LIFTING LINKAGE — p. 209
        • (1) Disassembling and Assembling — p. 209
• 5 ELECTRICAL SYSTEM — p. 211
  • MECHANISM — p. 212
    • 1. WIRING DIAGRAM — p. 213
    • 2. STARTING SYSTEM — p. 214
      • [1] RELAY — p. 215
      • [2] STARTER — p. 216
      • [3] GLOW PLUG — p. 217
      • [4] SAFETY SWITCH — p. 217
      • [5] FUEL PUMP — p. 218
      • [6] ENGINE STOP SOLENOID — p. 218
    • 3. CHARGING SYSTEM — p. 219
      • [1] AC DYNAMO — p. 220
      • [2] REGULATOR — p. 220
      • [3] EASY CHECKER™ — p. 221
    • 4. GAUGES — p. 222
      • [1] FUEL QUANTITY — p. 223
      • [2] COOLANT TEMPERATURE — p. 223
  • SERVICING — p. 224
    • 1. TROUBLESHOOTING — p. 225
    • 2. SERVICING SPECIFICATIONS — p. 227
    • 3. TIGHTENING TORQUES — p. 228
    • 4. CHECKING, DISASSEMBLING AND SERVICING — p. 229
      • [1] CHECKING — p. 229
        • (1) Battery — p. 229
        • (2) Safety Switches — p. 231
        • (3) Main Switch — p. 232
        • (4) Starter — p. 233
        • (5) Glow Plug — p. 234
        • (6) Safety Switch — p. 234
        • (7) Fuel Pump — p. 235
        • (8) Engine Stop Solenoid — p. 235
        • (9) Charging System — p. 236
        • (10) Lighting System — p. 237
        • (11) Sensors for Gauges — p. 238
        • (12) Cooling System and Gauges — p. 239
      • [2] DISASSEMBLING AND ASSEMBLING — p. 242
        • (1) Starting System (Starter) — p. 242
        • (2) Charging System (Dynamo) — p. 242
      • [3] SERVICING — p. 243
        • (1) Starting System — p. 243
        • (2) Charging System — p. 245
• 6 MOWER — p. 246
  • MECHANISM — p. 247
    • 1. POWER TRANSMISSION — p. 248
  • SERVICING — p. 250
    • 1. TROUBLESHOOTING — p. 251
    • 2. SERVICING SPECIFICATIONS — p. 252
    • 3. TIGHTENING TORQUES — p. 253
    • 4. CHECKING, DISASSEMBLING AND ASSEMBLING — p. 254
      • [1] CHECKING AND ADJUSTING — p. 254
      • [2] DISASSEMBLING AND ASSEMBLING — p. 257
        • (1) Dismounting Mower — p. 257
        • (2) Disassembling and Assembling — p. 260

Capabilities

The source outline separates mechanism explanations from servicing instructions for Transaxle, Front Axle, Hydraulic System, Electrical System, and Mower. Use these indexed headings to locate the applicable system in the source PDF, then confirm model-specific notes, specifications, illustrations, and operating conditions at the relevant page before carrying out service work.

Keep the source's safety sequence, prerequisite steps, labels, units, configuration notes, and footnotes with the selected task; do not apply an isolated value outside the conditions stated in the manual.

Technical reference

Reference tables include torque settings, wear limits, fluid and system capacities, dimensions, speed ratings, and emission data for service checks, adjustment work, and specification lookup. Use the values and conditions in the PDF for the applicable model and procedure.

• Service limits and settings: torque settings and wear limits.
• Fluid reference: fluid and system capacities.
• Machine specifications: dimensions and speed ratings.
• Electrical and emissions: emission data.

Delivery

This manual is supplied as a digital PDF file and is available for instant download after purchase. No physical media is shipped.

References

Kubota Workshop Manual for Mower, document code 9Y111-03011, PDF edition.