New Holland TM120/130/140/155/175/190 Manual 87611238

About this manual

New Holland's Repair Manual groups information for the covered tractors by system. The model list appears in Manual details. The contents include GENERAL.

Use the Manual Contents below to check that the exact maintenance, inspection, service, or repair procedure you need is included in this publication.

Manual details

Manufacturer

New Holland

Manual type

Repair Manual

Equipment type

Tractor

Models

TM120, TM130, TM140, TM155, TM175, and TM190

Document number

87611238

Language

English

Page count

3302

Document quality

High — clear, readable text, illustrations and diagrams.

Product highlights

Electrical systems

The manual includes wiring diagrams, electrical troubleshooting, connector views, and pinouts.

Hydraulic systems

The manual includes hydraulic circuit diagrams, hydraulic pressure-test material, and hydraulic valve-adjustment material.

Specifications and settings

The manual includes reference information for torque specifications, wear limits, pressure specifications, and dimensions.

Special tools

A special-tools section is included.

Maintenance

The manual includes a maintenance schedule.

Applicability and key coverage

Named models: TM120, TM130, TM140, TM155, TM175, and TM190.

The publisher's Contents identifies Book 1 (87611239), Book 2 (87611240), Book 3 (87611241), Book 4 (87611242), Book 5 (87611243), Book 6 (87611244), Book 7 (87611245), Book 8 (87611246), Book 9 (87611247), Book 10 (87611248), and Book 11 (87611249).

Systems and topics in this manual

GENERAL

Shimming, Rotating Shaft Seals, and O-rings.

ENGINE

Separating and Removing The Engine; 7.5L CNH Engine; Fuel System.

CLUTCH

13″ LUK Clutch, 14″ Valeo Clutch, and Hydraulic Clutch Control Assembly.

TRANSMISSION SYSTEMS

Semi-Powershift Transmission; Full Powershift Transmission - 30 and 40 kph Transmission; Dual Command Transmission (Hi-Lo).

DRIVE LINES

Transfer Box Tractors with Dual Command and Synchronized Mechanical Shuttle Transmissions; FWD Transfer Box and Drive Line Tractors with Semi-Powershift and Full Powershift Transmissions.

FRONT AXLE

Mechanical Front Axle and Terraglide (Front Axle Suspension).

MECHANICAL REAR WHEEL DRIVE

Mechanical Rear Wheel Drive (Models 120 - 155).

POWER TAKE-OFF

Power Take-Off, 120-155 Models; Hydraulic Front Lift and Power Take-Off.

BRAKES

Tractor Brakes and Air Trailer Brakes.

HYDRAULIC SYSTEM

Hydraulic Circuits, Variable Flow Hydraulic Pump Assembly 120 to 155 Models, and Electronic Draft Control.

STEERING

Hydrostatic Steering System.

FRONT AXLE AND WHEELS

Standard Front Axle, Heavy Duty Front Axle, and Axle Type.

AUXILIARY UNITS

Air Conditioning.

ELECTRICAL SYSTEM

Electrical Introduction (Except Semi Powershift After Serial No. ACM265009), Electronic Management Unit, and Electronic Instrument Cluster.

CAB

Cab Removal.

Manual contents

The source sections and independent chapters are listed below with their major indexed topics. Detailed procedures remain within those chapters in the PDF. References use physical PDF pages; unnumbered group headings follow the printed index.

• SECTION 00 - GENERAL — p. 111
  • Chapter 1 - General — p. 111
    • General Instructions — p. 113
    • Health and Safety — p. 115
    • Safety — p. 125
    • Ecology and the Environment — p. 128
    • Minimum Hardware Tightening Torques — p. 129
    • Federal Emissions Warranty — p. 131
    • California Emission Control Warranty Statement — p. 132
    • Lubricants and Fluids — p. 134
• SECTION 10 - ENGINE — p. 137
  • Chapter 1 -- Separating and Removing The Engine — p. 137
    • Tightening Torques — p. 138
    • Special Tools — p. 139
    • Separating and Removing the Engine
  • Chapter 2 -- 7.5L CNH Engine — p. 161
    • Specifications — p. 166
    • Tightening Torques — p. 173
    • Special Tools — p. 175
    • Troubleshooting — p. 176
    • Description of Operation — p. 180
    • Overhaul -- Cylinder Head — p. 187
    • Cooling System -- (CNH 7.5 Liter Engine) — p. 232
    • Overhaul -- Cooling System — p. 236
  • Chapter 3 -- Fuel System — p. 245
    • Specifications — p. 247
    • Tightening Torques — p. 247
    • Special Tools — p. 248
    • Description of Operations
    • Fuel System Overhaul — p. 253
• SECTION 18 - CLUTCH — p. 281
  • Chapter 1 -- Clutch — p. 281
    • Specifications — p. 282
    • Tightening Torques — p. 283
    • Sectional Views — p. 284
    • Special Tools — p. 285
    • Description and Operation — p. 285
    • Troubleshooting — p. 286
    • Overhaul — p. 287
• SECTION 21 - TRANSMISSION SYSTEMS — p. 295
  • Chapter 1 -- Semi-Powershift Transmission — p. 295
    • Semi-Powershift Transmission and Range Gears — p. 297
    • Creeper Gears — p. 299
    • Tightening Torques — p. 300
    • Special Tools — p. 301
    • Sectional Views — p. 305
    • Description and Operation — p. 308
    • Testing and Calibration
    • Overhaul
  • Chapter 2 -- Full Powershift Transmission -- 30 and 40 kph Transmission — p. 361
    • Creeper Gears — p. 365
    • Tightening Torques — p. 366
    • Special Tools — p. 371
    • Description and Operation — p. 374
    • Testing and Calibration — p. 393
    • Troubleshooting — p. 400
    • Overhaul — p. 405
  • Chapter 3 -- Full Powershift Transmission, 175 -- 190 Models — p. 449
    • Full Powershift Transmission — p. 451
    • Creeper Gears — p. 453
    • Tightening Torques — p. 454
    • Special Tools — p. 456
    • Description and Operation
    • Testing and Calibration — p. 488
    • Troubleshooting — p. 496
    • Overhaul — p. 501
  • Chapter 4 -- Dual Command Transmission (Hi--Lo) — p. 549
    • Hi--Lo Transmission and Range Gears — p. 550
    • Creeper Gears — p. 552
    • Shuttle Gears — p. 552
    • Tightening Torques — p. 553
    • Special Tools — p. 555
    • Sectional Views — p. 559
    • Description and Operation — p. 561
    • Testing and Calibration — p. 564
    • Troubleshooting — p. 570
    • Overhaul — p. 577
  • Chapter 5 -- Synchronized Mechanical Shuttle Transmission — p. 607
    • Synchronized Mechanical Shuttle Transmission — p. 608
    • Creeper Gears — p. 609
    • Shuttle Gears — p. 609
    • Tightening Torques — p. 610
    • Special Tools — p. 612
    • Sectional Views — p. 616
    • Description and Operation — p. 620
    • Troubleshooting — p. 620
    • Overhaul — p. 621
• SECTION 23 - DRIVE LINES — p. 651
  • Chapter 1 -- Transfer Box Tractors with Dual Command and Synchronized Mechanical Shuttle Transmissions — p. 651
    • Specifications — p. 652
    • Tightening Torques — p. 653
    • Special Tools — p. 653
    • Troubleshooting — p. 655
    • Description and Operation — p. 655
    • Overhaul — p. 659
  • Chapter 2 -- FWD Transfer Box and Drive Line Tractors with Semi-Powershift and Full Powershift Transmissions — p. 671
    • Specifications — p. 672
    • Tightening Torques — p. 672
    • Special Tools — p. 672
    • Troubleshooting — p. 673
    • Description and Operation — p. 674
    • Overhaul — p. 678
• SECTION 25 - FRONT AXLE — p. 685
  • Chapter 1 -- Mechanical Front Axle — p. 685
    • Tightening Torques — p. 689
    • Special Tools — p. 690
    • Sectional Views — p. 693
    • Description and Operation — p. 694
    • Troubleshooting — p. 697
    • Overhaul — p. 698
    • Adjustments — p. 725
  • Chapter 2 -- Terraglide (Front Axle Suspension) — p. 745
    • System Relief Valve — p. 746
    • Tightening Torques — p. 746
    • Description and Operation — p. 747
    • Troubleshooting — p. 763
    • Overhaul — p. 765
• SECTION 27 - MECHANICAL REAR WHEEL DRIVE — p. 779
  • Chapter 1 -- Mechanical Rear Wheel Drive (Models 120 -- 155) — p. 779
    • Pinion, Crown Wheel and Differential — p. 780
    • Final Drives — p. 781
    • Tightening Torques — p. 782
    • Special Tools — p. 784
    • Sectional Views — p. 787
    • Description and Operation — p. 789
    • Troubleshooting — p. 792
    • Overhaul — p. 794
  • Chapter 2 -- Mechanical Rear Wheel Drive (Models 175 -- 190) — p. 835
    • Pinion, Crown Wheel and Differential — p. 836
    • Final Drives — p. 837
    • Tightening Torques — p. 837
    • Special Tools — p. 839
    • Sectional Views — p. 842
    • Description and Operation — p. 844
    • Troubleshooting — p. 846
    • Overhaul — p. 848
• SECTION 31 - POWER TAKE-OFF — p. 889
  • Chapter 1 -- Power Take-Off, 120--155 Models — p. 889
    • Power Take-Off — p. 890
    • Tightening Torques — p. 891
    • Special Tools — p. 892
    • Sectional Views — p. 893
    • Description and Operation — p. 895
    • Troubleshooting and Fault Finding — p. 903
    • Overhaul — p. 905
  • Chapter 2 -- Power Take-Off, 175--190 Models — p. 919
    • Power Take-off — p. 920
    • Special Tools — p. 921
    • Tightening Torques — p. 921
    • Sectional Views — p. 922
    • Description and Operation — p. 923
    • Troubleshooting and Fault Finding — p. 935
    • Overhaul — p. 937
  • Chapter 3 -- Hydraulic Front Lift and Power Take-Off — p. 949
    • Description and Operation
    • Troubleshooting — p. 958
    • Overhaul
• SECTION 33 - BRAKES — p. 977
  • Chapter 1 -- Tractor Brakes — p. 977
    • Special Tools — p. 980
    • Tightening Torques — p. 982
    • Sectional Views — p. 983
    • Description and Operation — p. 986
    • Troubleshooting — p. 993
    • Overhaul — p. 994
  • Chapter 2 -- Air Trailer Brakes — p. 1025
    • Tightening Torques — p. 1028
    • Description and Operation — p. 1029
    • Troubleshooting — p. 1039
    • Overhaul
• SECTION 35 - HYDRAULIC SYSTEM — p. 1061
  • Chapter 1 - Hydraulic Circuits — p. 1061
    • Circuit Identification and Component Make Up — p. 1063
    • High Pressure Hydraulic System Type and Pump Identification — p. 1064
    • Transmission Identification
    • Variable Displacement CCLS High Pressure Hydraulic Circuit — p. 1068
    • Fixed Displacement Open Center High Pressure Hydraulic Circuit — p. 1081
    • Low Pressure Hydraulic Circuits - (Operation, Components and Hydraulic Flows)
    • Troubleshooting — p. 1111
  • Chapter 2 - Variable Flow Hydraulic Pump Assembly 120 to 155 Models — p. 1119
    • Specifications — p. 1122
    • Description and Operation — p. 1124
    • Troubleshooting — p. 1137
    • Overhaul — p. 1151
  • Chapter 3 - Variable Flow Hydraulic Pump Assembly 175 and 190 Models — p. 1171
    • Specifications — p. 1174
    • Tightening Torques — p. 1175
    • Description and Operation — p. 1176
    • Troubleshooting — p. 1198
    • Overhaul — p. 1211
  • Chapter 4 - Electronic Draft Control — p. 1229
    • Specifications — p. 1232
    • Special Tools — p. 1232
    • Tightening Torques — p. 1233
    • Description and Operation — p. 1234
    • Troubleshooting — p. 1255
    • Overhaul — p. 1264
  • Chapter 5 - Mechanical Rear Hydraulic Lift — p. 1279
    • Rear Hydraulic Lift — p. 1281
    • Implement Linkage — p. 1282
    • Tightening Torques — p. 1283
    • Special Tools — p. 1285
    • Description and Operation — p. 1286
    • Troubleshooting — p. 1293
    • Overhaul — p. 1295
    • Adjustments — p. 1311
  • Chapter 6 -- Closed Center Remote Control Valves — p. 1323
    • Special Tools — p. 1325
    • Specifications — p. 1325
    • Tightening Torques — p. 1325
    • Fault Finding and Pressure Testing — p. 1326
    • Description and Operation - Mechanical Remote Valves — p. 1329
    • Description and Operation - Electro-hydraulic Remote Valves — p. 1347
    • Overhaul — p. 1373
  • Chapter 7 - Open Center Remote Control Valves — p. 1403
    • Tightening Torques — p. 1404
    • Special Tools — p. 1404
    • Sectional Views — p. 1405
    • Description and Operation — p. 1408
    • Overhaul — p. 1413
  • Chapter 8 - External Lift Rams — p. 1423
    • Specifications — p. 1424
    • Description and Operation — p. 1425
    • Assist Ram Overhaul — p. 1425
    • External Assist Rams - 175 and 190 Models — p. 1426
  • Chapter 9 - Hydraulic Pressure Testing — p. 1429
    • Special Tools — p. 1432
    • Specifications — p. 1433
    • Fault Finding — p. 1436
    • Pump Pressure and Flow Testing — p. 1446
    • Transmission Pressure Testing — p. 1458
    • Trailer Brake Valve Pressure Testing — p. 1468
    • Cooler Bypass, Lubrication, and Brake Booster Testing — p. 1472
  • Chapter 10 - Fixed Displacement Gear Pumps — p. 1475
    • Rear Lift Hydraulic Pump — p. 1476
    • Hydrostatic Steering Pumps — p. 1477
    • Tightening Torques — p. 1478
    • Special Tools — p. 1479
    • Sectional Views — p. 1480
    • Description and Operation — p. 1480
    • Overhaul — p. 1481
  • Chapter 11 - Trailer Brake Auxiliary Valves — p. 1491
    • Tightening Torques — p. 1492
    • Special Tools — p. 1492
    • Description and Operation — p. 1493
    • Trailer Brake Valve Pressure Testing — p. 1510
  • Chapter 12 - Hydraulically Adjustable Right-Hand Lift and Top Link Cylinders — p. 1513
    • Top Link — p. 1514
    • Right-hand Lift Link — p. 1514
    • Adjustable Top Link — p. 1515
    • Sectional Views — p. 1516
    • Description and Operation — p. 1517
    • Overhaul — p. 1518
• SECTION 41 - STEERING — p. 1519
  • Chapter 1 -- Hydrostatic Steering System — p. 1519
    • Hydrostatic System — p. 1521
    • Two Wheel Drive Axle — p. 1521
    • Four Wheel Drive Axle — p. 1521
    • Tightening Torques — p. 1522
    • Special Tools — p. 1522
    • Description and Operation — p. 1523
    • Troubleshooting — p. 1535
    • System Testing — p. 1536
    • Overhaul — p. 1540
• SECTION 44 - FRONT AXLE AND WHEELS — p. 1555
  • Chapter 1 -- Front Axle and Wheels — p. 1555
    • Standard Front Axle — p. 1556
    • Heavy Duty Front Axle — p. 1557
    • Tightening Torques — p. 1558
    • Special Tools — p. 1560
    • Troubleshooting — p. 1560
    • Description and Operation — p. 1560
    • Sectional and Exploded Views — p. 1561
    • Overhaul — p. 1564
    • Alignment and Track Setting Procedures — p. 1575
• SECTION 50 - AUXILIARY UNITS — p. 1579
  • Chapter 1 -- Air Conditioning — p. 1579
    • Compressor — p. 1581
    • Tightening Torques — p. 1581
    • Special Tools — p. 1582
    • Description and Operation — p. 1583
    • Troubleshooting and Testing System — p. 1595
• SECTION 55 - ELECTRICAL SYSTEM — p. 1635
  • Chapter 1 -- Electrical Introduction (Except Semi Powershift After Serial No. ACM265009) — p. 1635
    • Electrical System and Fuses — p. 1637
    • Controllers — p. 1645
    • Diagnostic Connectors — p. 1649
    • Protecting the Electronic/Electrical Systems During Charging or Welding — p. 1650
  • Chapter 2 -- Electronic Management Unit — p. 1683
    • Introduction — p. 1684
    • Functions Controlled by the Electronic Management Unit — p. 1685
    • Work Lamp Operation — p. 1685
    • Electronic Management Unit with Terralockt
    • Calibration
    • Electronic Management Unit Removal and Installation — p. 1690
    • Electronic Management Unit Error Codes — p. 1691
  • Chapter 3 -- Electronic Instrument Cluster — p. 1693 — expand topics

    • Electronic Instrument Cluster — p. 1694
    • Area 1: Indicator and Warning Lamps — p. 1695
    • Critical Alarms — p. 1696
    • Area 2: Tractor Condition Bar Graphs — p. 1697
    • Area 3: Central Display — p. 1698
    • Area 4: Tractor Performance Monitor — p. 1700
    • Area 5: Function Keys — p. 1701
    • Senders, Sensors and Switches -- 120 to 155 models — p. 1702
    • Senders, Sensors and Switches -- 175 and 190 models — p. 1708
    • Ground Speed Calibration Procedure — p. 1715
    • Tractor Performance Monitor Setup — p. 1716
    • EIC Serviceability — p. 1718
    • Error Codes — p. 1719
    • Diagnostic Memory — p. 1720
    • Instrument Panel Byte Levels — p. 1721
    • Checking DIC Software Revision Level — p. 1722
  • Chapter 4 -- Analog Electronic Instrument Cluster — p. 1723
    • Analog Electronic Instrument Cluster — p. 1724
    • Area 1: Indicator and Warning Lamps — p. 1725
    • Area 2: Tractor Condition Gauges — p. 1726
    • Area 3 : Main Tachometer — p. 1726
    • Senders, Sensors and Switches — p. 1728
  • Chapter 5 -- Analog Instrument Cluster — p. 1735
    • Analog Instrument Cluster — p. 1736
    • Area 1: Indicator and Warning Lamps — p. 1737
    • Area 2: Fuel Level Gauge — p. 1738
    • Area 3: Tachometer — p. 1738
    • Area 4: Coolant Temperature Gauge — p. 1738
    • Senders, Sensors and Switches — p. 1739
    • Serviceability — p. 1744
  • Chapter 6 -- Starting System — p. 1745
    • Torque Specifications — p. 1746
    • Description of Operation — p. 1747
    • Troubleshooting — p. 1751
  • Chapter 7 -- Charging System — p. 1759
    • Torque Specifications — p. 1760
    • Description of Operation — p. 1761
    • System Testing and Fault Finding
    • Overhaul and Component Testing — p. 1769
  • Chapter 8 -- Battery — p. 1775
    • Description and Operation — p. 1776
  • Chapter 9 -- Wiring Diagrams -- Full Powershift (175--190 Models) Before Serial No. ACM263461, Full Powershift (120--155 Models) Before Serial No. ACM262719, Semi Powershift Models Before Serial No. ACM263458, Dual Command Models Before Serial No. ACM262036, Mechanical Transmissions Models Before Serial No. ACM262853 — p. 1783
    • How To Use the Linear Wiring Diagrams — p. 1785
    • Symbols — p. 1787
    • Component Identification — p. 1788
    • Wiring Diagrams — p. 1797
    • Circuit/Wire Identification Key — p. 2096
  • Symbols — p. 2110
  • Component Identification — p. 2111
  • Wire Colors — p. 2118
  • Wiring Diagrams
  • Circuit/Wire Identification Key — p. 2419
  • Chapter 10 -- Fault Code Descriptions -- Full Powershift (175--190 Models) Before Serial No. ACM263461, Full Powershift (120--155 Models) Before Serial No. ACM262719, Semi Powershift Models Before Serial No. ACM263458, Dual Command Models Before Serial No. ACM262036, Mechanical Transmissions Models Before Serial No. ACM262853 — p. 2431 — expand topics

    • Fault Codes and Fault Finding — p. 2433
    • Special Tools — p. 2434
    • Wiring Harness Repairs — p. 2434
    • Circuit Components -- Basic Description — p. 2443
    • Full Powershift Code Descriptions (175 and 190 Models) — p. 2469
    • Engine Fault Codes (All Transmissions) — p. 2485
    • Full Powershift Code Descriptions (120 to 155 Models) — p. 2489
    • Semi Powershift Models Code Descriptions — p. 2498
    • Dual Command Models Code Descriptions — p. 2507
    • Mechanical Transmission Models Code Descriptions — p. 2514
    • Vistronic Fan Fault Code Descriptions — p. 2516
  • Fault Codes and Fault Finding — p. 2520
  • Special Tools — p. 2521
  • Wiring Harness Repairs — p. 2521
  • Circuit Components -- Basic Description — p. 2530
  • Fault Display Logic — p. 2541
  • Full Powershift Code Descriptions (175 and 190 Models) — p. 2555
  • Engine Fault Codes (All Transmissions) — p. 2571
  • Full Powershift Code Descriptions (120 and 155 Models)
  • Dual Command Models Code Descriptions — p. 2593
  • Mechanical Transmission Models Code Descriptions — p. 2600
  • Vistronic Fan Fault Code Descriptions (All Transmissions) — p. 2602
  • Chapter 11 -- Diagnostic H Routines (Except Semi Powershift After Serial No. ACM265009) — p. 2603
    • Introduction — p. 2606
    • Full Powershift Transmission “H” Routine — p. 2607
    • Semi-Powershift Transmission ‘H’ Routines — p. 2626
    • Dual Command Transmission ‘H’ Routines — p. 2643
    • Electronic Draft Control Diagnostic Test Routine — p. 2658
    • Central Controller (XCM) 175 and 190 Models and Front Suspension 120 to 155 Models -- “H” Routines
    • Dual Command Transmission ‘H’ Routines — p. 2686
  • Chapter 12 -- Electrical Harnesses — p. 2701 — expand topics

    • Harnesses — p. 2703
    • Lighting Harness -- Full Powershift -- 175 to 190 Models — p. 2706
    • Front Main (Engine) Harness -- Full Powershift -- 175 to 190 Models — p. 2710
    • Rear Main (Transmission) Harness -- Full Powershift -- 175 to 190 Models — p. 2716
    • Chassis Main (Cab) Harness -- Full Powershift -- 175 to 190 Models — p. 2725
    • Electronic (Right-Hand Console) Harness Full Powershift -- 175 to 190 Models — p. 2740
    • Harnesses — p. 2752
    • Lighting Harness -- Full Powershift -- 120 to 155 Models — p. 2756
    • Front Main (Engine) Harness -- Full Powershift -- 120 to 155 Models — p. 2760
    • Rear Main (Transmission) Harness -- Full Powershift -- 120 to 155 Models — p. 2767
    • Chassis Main (Cab) Harness -- Full Powershift -- 120 to 155 models — p. 2775
    • Electronic (Right-Hand Console) Harness -- Full Powershift -- 120 to 155 Models — p. 2788
    • Harnesses — p. 2798
    • Lighting Harness -- Semipowershift -- 120 to 155 Models — p. 2802
    • Front Main (Engine) Harness -- Semipowershift -- 120 to 155 Models — p. 2806
    • Rear Main (Transmission) Harness -- Semipowershift -- 120 to 155 Models — p. 2813
    • Chassis Main (Cab) Harness -- Semipowershift -- 120 to 155 Models — p. 2821
    • Electronic (Right-Hand Console) Harness -- Semipowershift -- 120 to 155 Models — p. 2834
    • Harnesses — p. 2842
    • Lighting Harness -- Dual Command -- 120 to 140 Models — p. 2846
    • Front Main (Engine) Harness -- Dual Command -- 120 to 140 Models — p. 2850
    • Rear Main (Transmission) Harness -- Dual Command 120 to 140 Models — p. 2857
    • Chassis Main (Cab) Harness -- Dual Command -- 120 to 140 Models — p. 2865
    • Harnesses — p. 2703
    • Lighting Harness -- Full Powershift -- 175 to 190 Models — p. 2706
    • Front Main (Engine) Harness -- Full Powershift -- 175 to 190 Models — p. 2710
    • Rear Main (Transmission) Harness -- Full Powershift -- 175 to 190 Models — p. 2716
    • Chassis Main (Cab) Harness -- Full Powershift -- 175 to 190 Models — p. 2725
    • Electronic (Right-Hand Console) Harness Full Powershift -- 175 to 190 Models — p. 2740
  • Harnesses — p. 2752
  • Lighting Harness -- Full Powershift -- 120 to 155 Models — p. 2756
  • Front Main (Engine) Harness -- Full Powershift -- 120 to 155 Models — p. 2760
  • Rear Main (Transmission) Harness -- Full Powershift -- 120 to 155 Models — p. 2767
  • Chassis Main (Cab) Harness -- Full Powershift -- 120 to 155 models — p. 2775
  • Electronic (Right-Hand Console) Harness -- Full Powershift -- 120 to 155 Models — p. 2788
  • Harnesses — p. 2798
  • Lighting Harness -- Semipowershift -- 120 to 155 Models — p. 2802
  • Front Main (Engine) Harness -- Semipowershift -- 120 to 155 Models — p. 2806
  • Rear Main (Transmission) Harness -- Semipowershift -- 120 to 155 Models — p. 2813
  • Chassis Main (Cab) Harness -- Semipowershift -- 120 to 155 Models — p. 2821
  • Electronic (Right-Hand Console) Harness -- Semipowershift -- 120 to 155 Models — p. 2834
  • Harnesses — p. 2842
  • Lighting Harness -- Dual Command -- 120 to 140 Models — p. 2846
  • Front Main (Engine) Harness -- Dual Command -- 120 to 140 Models — p. 2850
  • Rear Main (Transmission) Harness -- Dual Command 120 to 140 Models — p. 2857
  • Chassis Main (Cab) Harness -- Dual Command -- 120 to 140 Models — p. 2865
  • Harnesses/Main Extension Harness Connectors — p. 2886
  • Lighting Harness — p. 2888
  • Front Main (Engine) Harness — p. 2892
  • Rear Main (Transmission) Harness — p. 2898
  • Chassis (Cab) Main and Electronic (Right-Hand Console) Harnesses — p. 2906
  • Chassis (Cab) Main Harness
  • Electronic (Right-Hand Console) Harness — p. 2966
  • Main Extension Harness Connectors — p. 2977
  • Lighting Harness — p. 2980
  • Front Main (Engine) Harness — p. 2984
  • Rear Main (Transmission) Harness — p. 2991
  • Chassis (Cab) Main Harness — p. 2999
  • Electronic (Right-Hand Console) Harness
  • Harnesses — p. 3020
  • Lighting Harness — p. 3023
  • Front Main (Engine) Harness — p. 3027
  • Rear Main (Transmission) Harness
  • Chassis (Cab) Main Harness — p. 3042
  • Electronic (Right-Hand Console) Harness — p. 3055
  • Chapter 13 -- Calibration Procedures — p. 3063
    • Required When — p. 3065
    • Setup Procedure — p. 3066
    • Calibration Error Codes
    • Calibration Procedures
  • Chapter 14 -- Electrical Introduction Semi Powershift Models From Serial No. ACM265009 — p. 3099
    • Electrical System and Fuses — p. 3100
    • Controllers — p. 3106
    • Diagnostic Connectors — p. 3108
    • Protecting the Electronic/Electrical Systems During Charging or Welding Precautions
  • How to Use the Linear Wiring Diagram — p. 3121
  • Symbols — p. 3123
  • Component Identification — p. 3124
  • Wire Colors — p. 3129
  • Wiring Diagrams — p. 3131
  • Wire Colors — p. 3204
  • Chassis (Cab) Main Harness — p. 3205
  • Right Hand Console Harness — p. 3217
  • Introduction
  • Semi Powershift Transmission (F -- --) -- Diagnostic ‘H’ Routines — p. 3227
  • Front Axle Suspension (L -- --) -- Diagnostic ‘H’ Routines — p. 3244
  • Electronic Draft Control (EDC) (H -- --) -- Diagnostic ‘H’ Routine — p. 3254
  • Power Take-off (PTO) (P -- --)-- Diagnostic ‘H’ Routine — p. 3265
  • Vistronic Fan (T -- --) -- Diagnostic ‘H’ Routine — p. 3272
  • 122 to 155 Models with Semi Powershift -- Transmission Fault Codes — p. 3280
  • 120 to 155 Models with Semi Powershift -- Electronic Draft Control Fault Codes — p. 3283
  • 120 to 155 Models with Semi Powershift -- Suspended Front Axle Fault Codes — p. 3285
  • 120 to 155 Models with Semi Powershift -- PTO Fault Codes — p. 3287
  • 120 to 155 Models with Semi Powershift -- Vistronic Fan Fault Codes — p. 3289
• SECTION 90 - CAB — p. 3291
  • Chapter 1 -- Cab Removal — p. 3291
    • Special Tools — p. 3292
    • Cab Removal — p. 3293
    • Cab Suspension Adjustment (Suspended Cab Only) — p. 3301

Technical reference

Reference tables include torque settings, wear limits, and dimensions for service specifications, limits, adjustment and repair reference data. Use the values and conditions in the PDF for the applicable model and procedure.

• Service limits and settings: torque settings and wear limits.
• Machine specifications: dimensions.

Delivery

This manual is supplied as a digital PDF file and is available for instant download after purchase. No physical media is shipped.

References

New Holland Repair Manual for Tractor, document code 87611238, PDF edition.