About this manual
This English-language repair manual covers New Holland TS90, TS100 and TS110 tractors. The 1,815-page PDF includes specifications, repair procedures, system testing, wiring diagrams and special-tool information across ten main sections, together with an electrical supplement.
The contents distinguish the engine, electrical and hydraulic systems, brakes and steering, power train, front axle, power take-off and air conditioning. Transmission and hydraulic variants have separate entries so you can select the relevant configuration.
Manual details
- Models
- TS90, TS100, TS110
- Manual type
- Repair Manual
- Format
- Language
- English
- Pages
- 1815
Applicability and limitations
- The electrical supplement is headed for Power Shuttle and with-cab models from serial number 139307B. This condition applies to that supplement, not to the entire manual.
- Model and component labels within individual specifications apply to those sections. They do not extend the manual's stated TS90, TS100 and TS110 coverage.
Systems and topics in this manual
General information
Engine, electrical, hydraulic, brake, steering, clutch and transmission specifications are grouped with front-axle, rear-wheel-drive, PTO and air-conditioning specifications.
Engine
Engine topics include overhaul specifications, special tools, grease and sealants, disassembly, cooling, lubrication, fuel, air cleaners, lift pump, injectors, injection pump, turbocharger and manifolds.
Electrical system
Topics include electronic and analogue instrument clusters, starting and charging systems, battery, wiring harnesses, connectors, component testing, diagnostic H routines and wiring diagrams.
Electrical supplement
The supplement provides wiring-diagram information for Electroshift, Dual Command and Synchro Command configurations, with separate with-cab and less-cab entries. Use the applicability statement above when selecting these diagrams.
Hydraulic systems
Hydraulic information includes circuit descriptions, transmission-specific low-pressure oil flow, lift assemblies, pumps and controls. Fixed-displacement and closed-centre load-sensing arrangements have separate entries.
Braking and steering systems
Braking-system information, brake-component overhaul, steering and system testing are listed separately.
Power train
Topics cover clutches, 16 x 16 Electroshift, Electroshift Power Shuttle, 12 x 12, 8 x 2, 16 x 4 Dual Command and 24 x 24 Dual Command transmissions, reduction gearbox, transfer box and rear-wheel drive.
Front axle
The section separates the mechanically driven front axle from the two-wheel-drive axle. Select the procedure for the fitted arrangement.
Power take-off
Independent PTO information includes mechanically operated and solenoid-operated arrangements, with separate fixed-displacement and CCLS hydraulic-pump specifications.
Air conditioning
Topics include specifications, operating principles, component descriptions, fault finding, system testing and component overhaul.
Special tools
Tools are listed for the engine, cooling, lubrication, injection, turbocharger, hydraulics, brakes, steering, clutch, transmissions, axles and air conditioning. Transmission-specific tools remain separately identified.
Manual contents
Expand each section to view its topics and printed references.
Main sections
- SECTION 1 -- GENERAL INFORMATION
- SECTION 2 -- ENGINE
- SECTION 3 -- ELECTRICAL SYSTEM
- SECTION 4 -- HYDRAULIC SYSTEMS
- SECTION 5 -- BRAKING AND STEERING SYSTEMS
- SECTION 6 -- POWER TRAIN
- SECTION 7 -- FRONT AXLE
- SECTION 8 -- POWER TAKE OFF
- SECTION 9 -- AIR CONDITIONING
- SECTION 10 -- SPECIAL TOOLS
Section 1 - General information
- ENGINE SPECIFICATIONS (ref. 1-2)
- ELECTRICAL SYSTEM SPECIFICATIONS (ref. 1-19)
- HYDRAULIC SYSTEM SPECIFICATIONS (ref. 1-21)
- BRAKING SYSTEM SPECIFICATIONS (ref. 1-40)
- STEERING SPECIFICATIONS (ref. 1-41)
- CLUTCHES SPECIFICATIONS (ref. 1-44)
- TRANSMISSION SYSTEMS SPECIFICATIONS (ref. 1-45)
- FRONT AXLE SPECIFICATIONS (ref. 1-61)
- MECHANICAL REAR WHEEL DRIVE SPECIFICATIONS (ref. 1-63)
- FRONT AXLE MECHANICAL TRANSMISSION SPECIFICATIONS (ref. 1-65)
- TWO WHEEL DRIVE AXLE SPECIFICATIONS (ref. 1-69)
- INDEPENDENT POWER TAKE OFF SYSTEMS SPECIFICATIONS (ref. 1-70)
- AIR CONDITIONING SPECIFICATIONS (ref. 1-72)
Section 2 - Engine
- ENGINE OVERHAUL SPECIFICATIONS (p. 2-2)
- SPECIAL TOOLS (p. 2-11)
- GREASE AND SEALANTS (p. 2-11)
- DIESEL ENGINE DISASSEMBLY (p. 2-19)
- COOLING (p. 2-57)
- LUBRICATION (p. 2-69)
- FUEL GENERAL (p. 2-77)
- AIR CLEANERS (p. 2-91)
- ELECTRIC LIFT PUMP (p. 2-97)
- INJECTORS (p. 2-101)
- INJECTION PUMP (p. 2-109)
- TURBOCHARGER (p. 2-119)
- MANIFOLDS (p. 2-133)
- INDEX (p. 2-136)
Section 3 - Electrical system
- ELECTRICAL INTRODUCTION (p. 3-2)
- ELECTRONIC INSTRUMENT CLUSTER (p. 3-23)
- ANALOGUE ELECTRONIC INSTRUMENT CLUSTER (p. 3-49)
- ANALOGUE INSTRUMENT CLUSTER (p. 3-57)
- STARTING SYSTEM (p. 3-61)
- CHARGING SYSTEM (p. 3-73)
- BATTERY (p. 3-91)
- HARNESSES AND CONNECTORS (p. 3-99)
- ELECTRICAL COMPONENT TESTING (p. 3-131)
- DIAGNOSTIC 'H' ROUTINES (p. 3-179)
- WIRING DIAGRAMS (p. 3-225)
- INDEX (p. 3-335)
Electrical supplement - wiring diagrams and circuit line references
- Wiring diagram circuit descriptions (All Models) (p. 1)
- How to use the linear wiring diagrams (p. 2)
- Symbols (p. 4)
- Component identification and wiring diagram location key (p. 5)
- Electroshift Transmission, With Cab (p. 11)
- Electroshift Transmission, Less Cab (p. 51)
- Dual Command Transmission, With Cab (p. 91)
- Synchro Command Transmission, With Cab (p. 131)
- Wire identification key (p. 171)
- System Diagrams (p. 183)
- Circuit 1 - Starting, Charging, Thermostart, Fuel Injection Pump (circuit lines 0-390)
- Circuit 2 - Transmission Circuits (circuit lines 400-1590)
- Circuit 3 - Electronic Draft Control (circuit lines 1600-2790)
- Circuit 4 - Four Wheel Drive and Differential Lock (circuit lines 2800-3190)
- Circuit 5 - Power Take Off (circuit lines 3200-3590)
- Circuit 6 - Cab Accessories (circuit lines 3600-4390)
- Circuit 7 - Main Lamps, Indicators & Hazards (circuit lines 4400-5190)
- Circuit 8 - Work Lamps (circuit lines 5200-5990)
- Circuit 9 - Sensors / Senders (circuit lines 6000-6390)
- Circuit 10 - Wipers & Washers (circuit lines 6400-6790)
- Circuit 11 - Processor Feed and Ground connections (circuit lines 6800-7190)
- Circuit 12 - Air-Conditioning & Heating (circuit lines 7200-7590)
Section 4 - Hydraulic systems
- INTRODUCTION (ref. 4-2)
- HYDRAULIC CIRCUIT DESCRIPTION (ref. 4-5)
- 8 X 2 ECONOSHIFT LOW PRESSURE HYDRAULIC OIL FLOW (ref. 4-14)
- 12 X 12 SYNCHRO COMMAND LOW PRESSURE HYDRAULIC OIL FLOW (ref. 4-16)
- 24 X 24 DUAL COMMAND LOW PRESSURE HYDRAULIC OIL FLOW (ref. 4-18)
- 16 X 16 ELECTROSHIFT LOW PRESSURE HYDRAULIC OIL FLOW (ref. 4-20)
- CLOSED CENTRE LOAD SENSING (CCLS) (ref. 4-22)
- SENSING HYDRAULIC PUMP (ref. 4-81)
- HYDRAULIC LIFT ASSEMBLY WITH TOP LINK SENSING (ref. 4-163)
- FIXED DISPLACEMENT GEAR TYPE PUMPS (ref. 4-209)
- REMOTE CONTROL VALVES (ref. 4-247)
- ASSIST RAMS (ref. 4-281)
- FOR TRACTORS WITH FIXED DISPLACEMENT HYDRAULIC PUMP (ref. 4-287)
- INDEX (ref. 4-378)
Section 5 - Braking and steering systems
- BRAKING SYSTEM (ref. 5-2)
- BRAKE SYSTEM COMPONENT OVERHAUL (ref. 5-7)
- STEERING (ref. 5-16)
- SYSTEM TESTING (ref. 5-22)
- INDEX (ref. 5-40)
Section 6 - Power train
- CLUTCHES (p. 6-2)
- TRANSMISSION SYSTEMS (p. 6-15)
- 16 X 16 ELECTROSHIFT TRANSMISSION (p. 6-15)
- 16 X 16 ELECTROSHIFT POWER SHUTTLE TRANSMISSION (p. 6-111)
- 12 X 12 TRANSMISSION (p. 6-203)
- 8 X 2 TRANSMISSION (p. 6-239)
- 16 X 4 DUAL COMMAND TRANSMISSION (p. 6-265)
- REDUCTION GEARBOX ASSEMBLY (p. 6-285)
- 24 X 24 DUAL COMMAND TRANSMISSION (p. 6-295)
- FRONT AXLE (p. 6-375)
- FOUR WHEEL DRIVE AXLE TRANSFER BOX TRACTORS WITH 8 X 2 AND 16 X 4 TRANSMISSION (p. 6-375)
- MECHANICAL REAR WHEEL DRIVE (p. 6-389)
- INDEX (p. 6-421)
Section 7 - Front axle
- FRONT AXLE MECHANICAL TRANSMISSION (ref. 7-2)
- TWO WHEEL DRIVE AXLE (ref. 7-41)
- INDEX (ref. 7-49)
Section 8 - Power take-off
- INDEPENDENT POWER TAKE OFF SYSTEMS (p. 8-2)
- INDEX (p. 8-37)
Section 9 - Air conditioning
- SPECIFICATIONS (p. 9-2)
- PRINCIPALS OF AIR CONDITIONING (p. 9-4)
- SYSTEM COMPONENTS - DESCRIPTION AND OPERATION (p. 9-8)
- FAULT FINDING AND TESTING THE AIR CONDITIONING SYSTEM (p. 9-15)
- COMPONENT OVERHAUL (p. 9-37)
- INDEX (p. 9-53)
Section 10 - Special tools
- ENGINE SPECIAL TOOLS (p. 10-2)
- COOLING SPECIAL TOOLS (p. 10-2)
- LUBRICATION SPECIAL TOOLS (p. 10-2)
- INJECTORS SPECIAL TOOLS (p. 10-3)
- INJECTION PUMP SPECIAL TOOLS (p. 10-3)
- TURBOCHARGER SPECIAL TOOLS (p. 10-4)
- HYDRAULIC SYSTEM SPECIAL TOOLS (p. 10-5)
- HYDRAULIC PUMP ASSEMBLY WITH VARIABLE DISPLACEMENT CLOSED CENTRE LOAD SENSING (CCLS) SPECIAL TOOLS (p. 10-5)
- HYDRAULIC LIFT ASSEMBLY WITH TOP LINK SENSING SPECIAL TOOLS (p. 10-6)
- FIXED DISPLACEMENT GEAR TYPE PUMPS SPECIAL TOOLS (p. 10-7)
- HYDRAULIC TRAILER BRAKES SPECIAL TOOLS (p. 10-8)
- REMOTE CONTROL VALVES SPECIAL TOOLS (p. 10-8)
- BRAKING SYSTEM SPECIAL TOOLS (p. 10-9)
- STEERING SPECIAL TOOLS (p. 10-9)
- CLUTCHES SPECIAL TOOLS (p. 10-10)
- TRANSMISSION SYSTEMS SPECIAL TOOLS (p. 10-11)
- 16 X 16 ELECTROSHIFT TRANSMISSION SPECIAL TOOLS (p. 10-11)
- 8 X 2 TRANSMISSION SPECIAL TOOLS (p. 10-12)
- 16 X 4 DUAL COMMAND TRANSMISSION SPECIAL TOOLS (p. 10-12)
- REDUCTION GEARBOX ASSEMBLY SPECIAL TOOLS (p. 10-13)
- 24 X 24 DUAL COMMAND TRANSMISSION SPECIAL TOOLS (p. 10-13)
- FRONT AXLE SPECIAL TOOLS (p. 10-14)
- MECHANICAL REAR WHEEL DRIVE SPECIAL TOOLS (p. 10-14)
- FRONT AXLE MECHANICAL TRANSMISSION SPECIAL TOOLS (p. 10-15)
- AIR CONDITIONING SPECIAL TOOLS (p. 10-16)
Delivery
Digital PDF format. No physical book is included.
No questions found.