New Holland 8160/8260/8360/8560 Repair Manual 40816040

About this manual

For the tractors listed in Manual details, this OEM New Holland Repair Manual brings the documented workshop information together in a PDF reference.

The manual provides source-listed headings and page references for locating the material in this publication. Find the relevant section through Manual contents; Manual details identifies the models and publication information.

Manual details

Manufacturer

New Holland

Manual type

Repair Manual

Equipment type

Tractor

Models

8160, 8260, 8360, and 8560

Document number

40816040

Text search

Available

PDF navigation

PDF bookmarks

Document quality

High — clear, readable text, illustrations and diagrams.

Systems and topics in this manual

SECTON 0 - INTRODUCTION

Health and safety precautions; Product identification; Hardware torque values.

ENGINES

Engine removal and installation; Fuel system components; Cooling system components.

ELECTRICAL SYSTEM

Electrical system and fuses; Clutch pedal and brake pedal switch adjustments; Temporary wiring repair.

CLUTCH

Clutch (not used in North America); Hydraulic control assembly removal and installation; Hydraulic control assembly disassembly and reassembly.

TRANSMISSIONS

Range Command transmission specifications; Range Command transmission sectional views; Range Command transmission removal, installation and overhaul.

MECHANICAL REAR WHEEL DRIVE

Mechanical rear wheel drive sectional views; Mechanical rear wheel drive troubleshooting; Mechanical rear wheel drive removal, installation and overhaul.

BRAKES

Service brakes removal, installation and overhaul; Service brake control pump removal and installation; Parking brake assembly removal, installation and overhaul.

POWER TAKE-OFF

Power take-off hydraulic flow diagrams; Power take-off troubleshooting; Power take-off removal, installation and overhaul.

HYDRAULIC SYSTEM

Hydraulic circuit schematics, Closed center high pressure hydraulic circuit, and Open center high pressure hydraulic circuits.

DRIVE LINES-FWD

Drive lines hydraulic flow diagrams; Drive lines troubleshooting; Drive lines removal, installation and overhaul.

CAB

Cab, bonded glass removal and replacement.

Manual contents

The contents follow the printed source sections and chapters in order. Chapter page numbers are physical PDF pages. Printed references retain the labels in the manual; they are not verified physical PDF destinations.

• SECTON 0 - INTRODUCTION — p. 3
  • Chapter 1 - INTRODUCTION — p. 3 — expand topics

    • FOREWORD — printed ref. 0-1-2
    • PRECAUTIONARY STATEMENTS — printed ref. 0-1-3
    • PERSONAL SAFETY — printed ref. 0-1-3
    • MACHINE SAFETY — printed ref. 0-1-3
    • SAFETY PRECAUTIONS — printed ref. 0-1-4
    • HEALTH AND SAFETY PRECAUTIONS — printed ref. 0-1-7
    • PRODUCT IDENTIFICATION — printed ref. 0-1-15
    • SERVICE TECHNIQUES — printed ref. 0-1-17
    • SEALER SPECIFICATIONS — printed ref. 0-1-19
    • HARDWARE TORQUE VALUES — printed ref. 0-1-19
    • MINIMUM HARDWARE TIGHTENING TORQUE — printed ref. 0-1-20
    • MINIMUM HARDWARE TIGHTENING TORQUE — printed ref. 0-1-21
    • INDEX — printed ref. 0-1-22
• SECTION 1 - ENGINES — p. 25
  • Chapter 1 - ENGINE — p. 25 — expand topics

    • SPECIFICATIONS — printed ref. 1-1-2
    • FUEL TEST PLAN — printed ref. 1-1-10
    • TIGHTENING TORQUE — printed ref. 1-1-14
    • SPECIAL TOOLS — printed ref. 1-1-15
    • GREASES AND SEALANTS — printed ref. 1-1-16
    • FAULT FINDING — printed ref. 1-1-17
    • DESCRIPTION AND OPERATION — printed ref. 1-1-21
    • ENGINE STRIPDOWN – GENERAL — printed ref. 1-1-29
    • ENGINE REMOVAL AND INSTALLATION — printed ref. 1-1-30
    • ENGINE DISASSEMBLY AND OVERHAUL — printed ref. 1-1-33
    • FUEL SYSTEM COMPONENTS — printed ref. 1-1-64
    • COOLING SYSTEM COMPONENTS — printed ref. 1-1-82
    • INDEX — printed ref. 1-1-90
• SECTION 2 - ELECTRICAL SYSTEM — p. 115
  • Chapter 1 - ELECTRICAL INTRODUCTION — p. 115
    • ELECTRICAL SYSTEM AND FUSES — printed ref. 2-1-2
    • CAB CONTROLS — printed ref. 2-1-7
    • SYSTEM PRECAUTIONS – BATTERY CHARGING AND WELDING — printed ref. 2-1-17
    • CAB SWITCHES – REMOVAL AND REPLACEMENT — printed ref. 2-1-18
    • CLUTCH PEDAL AND BRAKE PEDAL SWITCH ADJUSTMENTS — printed ref. 2-1-20
    • COMPONENT TESTING AND SPECIFICATIONS — printed ref. 2-1-21
    • TEMPORARY WIRING REPAIR — printed ref. 2-1-22
    • INDEX — printed ref. 2-9-230
  • Chapter 2 - ELECTRONIC MANAGEMENT UNIT — p. 139
    • INTRODUCTION — printed ref. 2-2-2
    • ELECTRONIC MANAGEMENT UNIT — printed ref. 2-2-4
    • TOUCH PANELS — printed ref. 2-2-6
    • WORKLAMP OPERATION — printed ref. 2-2-7
    • OTHER FUNCTIONS — printed ref. 2-2-8
    • CALIBRATION — printed ref. 2-2-9
    • REMOVAL AND INSTALLATION — printed ref. 2-2-10
    • ERROR CODES — printed ref. 2-2-11
    • INDEX — printed ref. 2-9-230
  • Chapter 3 - ELECTRONIC INSTRUMENT CLUSTER — p. 167
    • INTRODUCTION — printed ref. 2-3-2
    • SENDERS AND SENSORS — printed ref. 2-3-10
    • PROGRAMMING CENTRAL LCD — printed ref. 2-3-16
    • PROGRAMMING PERFORMANCE MONITOR — printed ref. 2-3-18
    • SERVICEABILITY — printed ref. 2-3-20
    • FAULT CODE CHARTS — printed ref. 2-3-21
    • FAULT FINDING FLOW CHARTS — printed ref. 2-3-22
    • DIAGNOSTIC MEMORY — printed ref. 2-3-32
    • INDEX — printed ref. 2-9-230
  • Chapter 4 - ANALOG ELECTRONIC INSTRUMENT CLUSTER — p. 201
    • INTRODUCTION — printed ref. 2-4-2
    • SENDERS AND SENSORS — printed ref. 2-4-6
    • SERVICEABILITY — printed ref. 2-4-12
    • INDEX — printed ref. 2-9-230
  • Chapter 5 - ANALOG INSTRUMENT CLUSTER (NOTE: NOT USED IN NORTH AMERICA) — p. 213
    • INTRODUCTION — printed ref. 2-5-2
    • SENDER, SENSORS & SWITCHES — printed ref. 2-5-5
    • SERVICEABILITY — printed ref. 2-5-10
    • INDEX — printed ref. 2-9-230
  • Chapter 6 - STARTING SYSTEM — p. 223
    • SPECIFICATIONS — printed ref. 2-6-2
    • TIGHTENING TORQUE — printed ref. 2-6-2
    • DESCRIPTION AND OPERATION — printed ref. 2-6-3
    • FAULT FINDING — printed ref. 2-6-6
    • SYSTEM TESTING — printed ref. 2-6-7
    • REMOVAL AND INSTALLATION — printed ref. 2-6-9
    • OVERHAUL — printed ref. 2-6-10
    • BENCH TESTS — printed ref. 2-6-12
    • INDEX — printed ref. 2-9-230
  • Chapter 7 - CHARGING SYSTEM — p. 237
    • SPECIFICATIONS — printed ref. 2-7-2
    • TIGHTENING TORQUE — printed ref. 2-7-2
    • DESCRIPTION AND OPERATION — printed ref. 2-7-3
    • FAULT FINDING — printed ref. 2-7-5
    • REMOVAL, INSTALLATION AND OVERHAUL — printed ref. 2-7-11
    • INDEX — printed ref. 2-9-230
  • Chapter 8 - BATTERY — p. 255
    • SPECIFICATIONS — printed ref. 2-8-2
    • DESCRIPTION AND OPERATION — printed ref. 2-8-2
    • REMOVAL AND INSTALLATION — printed ref. 2-8-3
    • BATTERY MAINTENANCE AND TESTING — printed ref. 2-8-4
    • BATTERY CHARGING — printed ref. 2-8-5
    • COMMON CAUSES OF BATTERY FAILURE — printed ref. 2-8-8
    • INDEX — printed ref. 2-9-230
  • Chapter 9 - WIRING DIAGRAMS — p. 263 — expand topics

    • INTRODUCTION — printed ref. 2-9-2
    • RANGE COMMAND — printed ref. 2-9-4
    • HARNESS CONNECTORS — printed ref. 2-9-8
    • CIRCUITS — printed ref. 2-9-35
    • DUAL COMMAND — printed ref. 2-9-83
    • HARNESS CONNECTORS — printed ref. 2-9-88
    • CIRCUITS — printed ref. 2-9-114
    • SHUTTLE COMMAND — printed ref. 2-9-162
    • HARNESS CONNECTORS — printed ref. 2-9-166
    • CIRCUITS — printed ref. 2-9-189
    • INDEX — printed ref. 2-9-230
• SECTION 3 - CLUTCH — p. 495
  • Chapter 1 - CLUTCH (NOTE: NOT USED IN NORTH AMERICA) — p. 495
    • SPECIFICATIONS — printed ref. 3-1-2
    • TIGHTENING TORQUE — printed ref. 3-1-3
    • SECTIONAL VIEWS — printed ref. 3-1-4
    • SPECIAL TOOLS — printed ref. 3-1-5
    • DESCRIPTION AND OPERATION — printed ref. 3-1-5
    • TROUBLESHOOTING — printed ref. 3-1-5
    • CLUTCH REMOVAL – INSTALLATION — printed ref. 3-1-7
    • HYDRAULIC CONTROL ASSEMBLY REMOVAL – INSTALLATION — printed ref. 3-1-15
    • HYDRAULIC CONTROL ASSEMBLY DISASSEMBLY – REASSEMBLY — printed ref. 3-1-17
    • INDEX — printed ref. 3-1-20
• SECTION 4 - TRANSMISSIONS — p. 515
  • Chapter 1 - RANGE COMMAND TRANSMISSION — p. 515
    • SPECIFICATIONS — printed ref. 4-1-2
    • TIGHTENING TORQUE — printed ref. 4-1-4
    • SPECIAL TOOLS — printed ref. 4-1-6
    • SECTIONAL VIEWS — printed ref. 4-1-10
    • DESCRIPTION AND OPERATION — printed ref. 4-1-13
    • TROUBLESHOOTING — printed ref. SEE CHAPTER 2
    • REMOVAL – INSTALLATION – OVERHAUL — printed ref. 4-1-16
    • INDEX — printed ref. 4-5-63
  • Chapter 2 - RANGE COMMAND TRANSMISSION — p. 581
    • INTRODUCTION — printed ref. 4-2-2
    • LIMP HOME PROCEDURE — printed ref. 4-2-4
    • PRESSURE TESTING — printed ref. 4-2-5
    • CALIBRATIONS — printed ref. 4-2-8
    • DIAGNOSTIC ROUTINES (‘H’ MODE MENUS) — printed ref. 4-2-11
    • ERROR CODES — printed ref. 4-2-26
    • ERROR CODE FAULT FINDING FLOW DIAGRAMS — printed ref. 4-2-31
    • INDEX — printed ref. 4-5-63
  • Chapter 3 - DUAL COMMAND TRANSMISSION — p. 643
    • SPECIFICATIONS — printed ref. 4-3-2
    • TIGHTENING TORQUE — printed ref. 4-3-5
    • SPECIAL TOOLS — printed ref. 4-3-7
    • SECTIONAL VIEWS — printed ref. 4-3-11
    • DESCRIPTION AND OPERATION — printed ref. 4-3-13
    • TROUBLESHOOTING — printed ref. SEE CHAPTER 4
    • REMOVAL – INSTALLATION – OVERHAUL — printed ref. 4-3-16
    • INDEX — printed ref. 4-5-63
  • Chapter 4 - DUAL COMMAND TRANSMISSION — p. 701
    • INTRODUCTION — printed ref. 4-4-2
    • CALIBRATIONS — printed ref. 4-4-4
    • PRESSURE TESTING — printed ref. 4-4-6
    • LIMP HOME PROCEDURE — printed ref. 4-4-9
    • DIAGNOSTIC ROUTINES (‘H’ MENU MODES) — printed ref. 4-4-10
    • ERROR CODES — printed ref. 4-4-21
    • ERROR CODE FAULT FINDING FLOW DIAGRAMS — printed ref. 4-4-23
    • INDEX — printed ref. 4-5-63
  • Chapter 5 - MECHANICAL TRANSMISSION (NOTE: NOT USED IN NORTH AMERICA) — p. 745
    • SPECIFICATIONS — printed ref. 4-5-2
    • TIGHTENING TORQUE — printed ref. 4-5-4
    • SPECIAL TOOLS — printed ref. 4-5-6
    • SECTIONAL VIEWS — printed ref. 4-5-9
    • DESCRIPTION AND OPERATION — printed ref. 4-5-13
    • TROUBLESHOOTING — printed ref. 4-5-13
    • MECHANICAL SPEED CLUTCH/TRANSMISSION HOUSING REMOVAL – INSTALLATION – OVERHAUL — printed ref. 4-5-14
    • INDEX — printed ref. 4-5-63
• SECTION 5 - MECHANICAL REAR WHEEL DRIVE — p. 809
  • Chapter 1 - MECHANICAL REAR WHEEL DRIVE — p. 809
    • SPECIFICATIONS — printed ref. 5-1-2
    • TIGHTENING TORQUE — printed ref. 5-1-3
    • SPECIAL TOOLS — printed ref. 5-1-5
    • SECTIONAL VIEWS — printed ref. 5-1-8
    • DESCRIPTION AND OPERATION — printed ref. 5-1-10
    • TROUBLESHOOTING — printed ref. 5-1-13
    • REMOVAL – INSTALLATION – OVERHAUL — printed ref. 5-1-15
    • INDEX — printed ref. 5-1-74
• SECTION 6 - BRAKES — p. 883
  • Chapter 1 - BRAKES — p. 883
    • SPECIFICATIONS — printed ref. 6-1-2
    • TIGHTENING TORQUE — printed ref. 6-1-3
    • SECTIONAL VIEWS — printed ref. 6-1-3
    • SPECIAL TOOLS — printed ref. 6-1-5
    • DESCRIPTION AND OPERATION — printed ref. 6-1-6
    • TROUBLESHOOTING — printed ref. 6-1-6
    • REMOVAL – INSTALLATION – OVERHAUL, SERVICE BRAKES — printed ref. 6-1-8
    • REMOVAL – INSTALLATION, SERVICE BRAKE CONTROL PUMP — printed ref. 6-1-12
    • REMOVAL – INSTALLATION – OVERHAUL, PARKING BRAKE ASSEMBLY — printed ref. 6-1-16
    • INDEX — printed ref. 6-2-24
  • Chapter 2 - AIR TRAILER BRAKES (NOTE: NOT USED IN NORTH AMERICA) — p. 905
    • SPECIFICATIONS — printed ref. 6-2-2
    • TIGHTENING TORQUE — printed ref. 6-2-3
    • DESCRIPTION AND OPERATION — printed ref. 6-2-4
    • FAULT FINDING — printed ref. 6-2-9
    • REMOVAL AND INSTALLATION — printed ref. 6-2-10
    • OVERHAUL — printed ref. 6-2-14
    • INDEX — printed ref. 6-2-24
• SECTION 7 - POWER TAKE-OFF — p. 929
  • Chapter 1 - POWER TAKE-OFF — p. 929
    • SPECIFICATIONS — printed ref. 7-1-2
    • TIGHTENING TORQUE — printed ref. 7-1-4
    • SPECIAL TOOLS — printed ref. 7-1-4
    • SECTIONAL VIEWS — printed ref. 7-1-5
    • DESCRIPTION AND OPERATION — printed ref. 7-1-7
    • HYDRAULIC FLOW DIAGRAMS — printed ref. 7-1-8
    • TROUBLESHOOTING — printed ref. 7-1-11
    • REMOVAL – INSTALLATION – OVERHAUL — printed ref. 7-1-12
    • INDEX — printed ref. 7-1-24
• SECTION 8 - HYDRAULIC SYSTEM — p. 953
  • Chapter 1 - HYDRAULIC CIRCUITS — p. 953
    • INTRODUCTION AND CIRCUIT IDENTIFICATION — printed ref. 8-1-2
    • HYDRAULIC CIRCUIT SCHEMATICS — printed ref. 8-1-5
    • CLOSED CENTER HIGH PRESSURE HYDRAULIC CIRCUIT — printed ref. 8-1-10
    • OPEN CENTER HIGH PRESSURE HYDRAULIC CIRCUITS — printed ref. 8-1-15
    • LOW PRESSURE CIRCUIT OPERATION — printed ref. 8-1-23
    • INDEX — printed ref. 8-9-4
  • Chapter 2 - VARIABLE FLOW HYDRAULIC PUMP ASSEMBLY — p. 991 — expand topics

    • SPECIAL TOOLS — printed ref. 8-2-2
    • SPECIFICATIONS — printed ref. 8-2-3
    • TIGHTENING TORQUE — printed ref. 8-2-4
    • DESCRIPTION AND OPERATION — printed ref. 8-2-5
    • FAULT FINDING — printed ref. 8-2-19
    • PUMP PRESSURE AND FLOW TESTING — printed ref. 8-2-25
    • OVERHAUL — printed ref. 8-2-31
    • PUMP REMOVAL AND INSTALLATION — printed ref. 8-2-35
    • STEERING PUMP OVERHAUL — printed ref. 8-2-38
    • CHARGE PUMP OVERHAUL — printed ref. 8-2-40
    • VARIABLE FLOW PISTON PUMP OVERHAUL — printed ref. 8-2-41
    • PUMP DRIVE GEAR AND BEARING OVERHAUL — printed ref. 8-2-44
    • INDEX — printed ref. 8-9-4
  • Chapter 3 - FIXED DISPLACEMENT GEAR PUMPS NOTE: NOT USED IN NORTH AMERICA — p. 1035
    • SPECIFICATIONS — printed ref. 8-3-2
    • TIGHTENING TORQUE — printed ref. 8-3-4
    • SPECIAL TOOLS — printed ref. 8-3-5
    • SECTIONAL VIEWS - DESCRIPTION AND OPERATION — printed ref. 8-3-6
    • TROUBLESHOOTING — printed ref. SEE CHAPTER 5
    • REMOVAL - INSTALLATION - OVERHAUL — printed ref. 8-3-7
    • INDEX — printed ref. 8-9-4
  • Chapter 4 - HYDRAULIC LIFT ASSEMBLY WITH ELECTRONIC DRAFT CONTROL — p. 1051 — expand topics

    • SPECIFICATIONS — printed ref. 8-4-3
    • TIGHTENING TORQUE — printed ref. 8-4-4
    • DESCRIPTION AND OPERATION — printed ref. 8-4-6
    • FAULT FINDING AND REPAIR — printed ref. 8-4-23
    • ELECTRONIC DRAFT CONTROL ERROR CODES — printed ref. 8-4-32
    • ELECTRONIC DRAFT CONTROL WIRING DIAGRAM — printed ref. 8-4-67
    • OVERHAUL OF ELECTRONIC DRAFT CONTROL VALVE — printed ref. 8-4-70
    • LOAD SENSING PIN REPLACEMENT — printed ref. 8-4-74
    • OVERHAUL OF HYDRAULIC LIFT ASSEMBLY — printed ref. 8-4-75
    • LIFT CYLINDER SAFETY VALVE ADJUSTMENT — printed ref. 8-4-81
    • INDEX — printed ref. 8-9-4
  • Chapter 5 - MECHANICAL REAR HYDRAULIC LIFT NOTE: NOT USED IN NORTH AMERICA — p. 1133
    • SPECIFICATIONS — printed ref. 8-5-2
    • TIGHTENING TORQUE — printed ref. 8-5-4
    • SPECIAL TOOLS — printed ref. 8-5-6
    • SECTIONAL VIEWS — printed ref. 8-5-7
    • DESCRIPTION AND OPERATION — printed ref. 8-5-10
    • TROUBLESHOOTING — printed ref. 8-5-14
    • REMOVAL - INSTALLATION - OVERHAUL — printed ref. 8-5-16
    • INDEX — printed ref. 8-9-4
  • Chapter 6 - CLOSED CENTER REMOTE CONTROL VALVES — p. 1181
    • SPECIFICATIONS — printed ref. 8-6-2
    • TIGHTENING TORQUE — printed ref. 8-6-2
    • SPECIAL TOOLS — printed ref. 8-6-2
    • DESCRIPTION AND OPERATION — printed ref. 8-6-3
    • PRESSURE TESTING — printed ref. 8-6-19
    • OVERHAUL — printed ref. 8-6-20
    • FAULT FINDING — printed ref. SEE CHAPTER 2
    • INDEX — printed ref. 8-9-4
  • Chapter 7 - OPEN CENTER REMOTE CONTROL VALVES NOTE: NOT USED IN NORTH AMERICA — p. 1211
    • SPECIFICATIONS - TIGHTENING TORQUE - SPECIAL TOOLS — printed ref. 8-7-2
    • SECTIONAL VIEWS — printed ref. 8-7-3
    • DESCRIPTION AND OPERATION — printed ref. 8-7-5
    • REMOVAL - INSTALLATION - OVERHAUL — printed ref. 8-7-9
    • INDEX — printed ref. 8-9-4
  • Chapter 8 - TRAILER BRAKE AUXILIARY VALVE NOTE: NOT USED IN NORTH AMERICA — p. 1229
    • SECTIONAL VIEWS — printed ref. 8-8-2
    • DESCRIPTION AND OPERATION — printed ref. 8-8-2
    • TROUBLESHOOTING — printed ref. 8-8-11
    • INDEX — printed ref. 8-9-4
  • Chapter 9 - ASSIST RAM — p. 1243
    • SPECIFICATIONS — printed ref. 8-9-2
    • SECTIONAL VIEWS — printed ref. 8-9-2
    • DESCRIPTION AND OPERATION — printed ref. 8-9-2
    • REMOVAL - INSTALLATION - OVERHAUL — printed ref. 8-9-3
    • INDEX — printed ref. 8-9-4
• SECTION 9 - DRIVE LINES-FWD — p. 1247
  • Chapter 1 - DRIVE LINES — p. 1247
    • SPECIFICATIONS — printed ref. 9-1-2
    • TIGHTENING TORQUE — printed ref. 9-1-3
    • SPECIAL TOOLS — printed ref. 9-1-3
    • SECTIONAL VIEWS — printed ref. 9-1-5
    • DESCRIPTION AND OPERATION — printed ref. 9-1-6
    • TROUBLESHOOTING — printed ref. 9-1-6
    • HYDRAULIC FLOW DIAGRAMS — printed ref. 9-1-7
    • REMOVAL – INSTALLATION – OVERHAUL — printed ref. 9-1-9
    • INDEX — printed ref. 9-4-24
  • Chapter 2 - FRONT AXLE AND WHEELS (STANDARD) — p. 1267
    • SPECIFICATIONS — printed ref. 9-2-2
    • TIGHTENING TORQUE — printed ref. 9-2-3
    • SPECIAL TOOLS — printed ref. 9-2-4
    • DESCRIPTION AND OPERATION — printed ref. 9-2-4
    • TROUBLESHOOTING — printed ref. 9-2-4
    • SECTIONAL VIEWS — printed ref. 9-2-5
    • REMOVAL - INSTALLATION - OVERHAUL — printed ref. 9-2-6
    • FRONT WHEEL SETTING TESTS — printed ref. 9-2-15
    • INDEX — printed ref. 9-4-24
  • Chapter 3 - MECHANICAL FRONT AXLE (FWD) — p. 1283
    • SPECIFICATIONS — printed ref. 9-3-2
    • TIGHTENING TORQUE — printed ref. 9-3-4
    • SPECIAL TOOLS — printed ref. 9-3-5
    • SECTIONAL VIEWS — printed ref. 9-3-6
    • DESCRIPTION AND OPERATION — printed ref. 9-3-7
    • TROUBLESHOOTING — printed ref. 9-3-10
    • REMOVAL - INSTALLATION - OVERHAUL — printed ref. 9-3-11
    • INDEX — printed ref. 9-4-24
  • Chapter 4 - HYDROSTATIC STEERING SYSTEM — p. 1325 — expand topics

    • SPECIFICATIONS — printed ref. 9-4-2
    • TIGHTENING TORQUE — printed ref. 9-4-3
    • SPECIAL TOOLS — printed ref. 9-4-3
    • DESCRIPTION AND OPERATION — printed ref. 9-4-4
    • FAULT FINDING — printed ref. 9-4-7
    • SYSTEM TESTING — printed ref. 9-4-8
    • STEERING MOTOR - REMOVAL AND INSTALLATION — printed ref. 9-4-11
    • STEERING MOTOR - OVERHAUL — printed ref. 9-4-12
    • STEERING COLUMN - REMOVAL AND INSTALLATION — printed ref. 9-4-19
    • TWO WHEEL DRIVE STEERING CYLINDER - REMOVAL AND INSTALLATION — printed ref. 9-4-20
    • TWO WHEEL DRIVE STEERING CYLINDER - OVERHAUL — printed ref. 9-4-21
    • FRONT WHEEL DRIVE STEERING CYLINDER - REMOVAL AND INSTALLATION — printed ref. 9-4-22
    • FRONT WHEEL DRIVE STEERING CYLINDER - OVERHAUL — printed ref. 9-4-23
    • INDEX — printed ref. 9-4-24
• SECTION 10 - CAB — p. 1349
  • Chapter 1 - GLASS REPLACEMENT — p. 1349
    • CAB, BONDED GLASS REMOVAL AND REPLACEMENT — printed ref. 10-1-2
    • INDEX — printed ref. 10-3-54
  • Chapter 2 - CAB INTERIOR COMPONENTS — p. 1355
    • CAB TRIM REMOVAL AND INSTALLATION — printed ref. 10-2-2
    • HEATER BLOWER MOTOR REMOVAL AND INSTALLATION — printed ref. 10-2-5
    • WIPER MOTORS REMOVAL AND INSTALLATION — printed ref. 10-2-6
    • INDEX — printed ref. 10-3-54
  • Chapter 3 - AIR CONDITIONING — p. 1361 — expand topics

    • SPECIFICATIONS — printed ref. 10-3-2
    • TIGHTENING TORQUE — printed ref. 10-3-3
    • SPECIAL TOOLS — printed ref. 10-3-3
    • SAFETY PRECAUTIONS — printed ref. 10-3-3
    • DESCRIPTION AND OPERATION — printed ref. 10-3-4
    • FAULT FINDING AND SYSTEM TESTING — printed ref. 10-3-15
    • LEAK TESTING, CHARGING, DISCHARGING AND SYSTEM FLUSHING — printed ref. 10-3-32
    • COMPONENT OVERHAUL (EXCLUDING COMPRESSOR) — printed ref. 10-3-37
    • COMPRESSOR REMOVAL AND INSTALLATION — printed ref. 10-3-44
    • COMPRESSOR OVERHAUL — printed ref. 10-3-45
    • INDEX — printed ref. 10-3-54

Delivery

This manual is supplied as a digital PDF file and is available for instant download after purchase. No physical media is shipped.

References

New Holland Repair Manual for Tractor, document code 40816040, PDF edition.