The U.S. Kubota KX71-3S weighs 6,305 lb with a canopy or 6,550 lb with a cab. It is 4 ft 11 in wide and has a maximum digging depth of 9 ft 9 in. These are the rubber-track Super Series specifications; check the full designation on the model plate when looking at a used KX71-3.
An advertisement may include a thumb, coupler and several buckets while quoting only the brochure weight. Before arranging collection, ask the seller exactly what is included in both the sale and the weight figure.
Kubota's U.S. KX71-3 Super Series brochure gives the following figures for the KX71-3S. Earlier machines, imports and other suffixes need their own specification check.
| Specification | U.S. KX71-3S reference |
|---|---|
| Operating weight, canopy / cab | 6,305 / 6,550 lb (2,860 / 2,970 kg) |
| Overall width | 4 ft 11 in (1,500 mm) |
| Overall length | 14 ft 11 in (4,550 mm) |
| Maximum digging depth | 9 ft 9 in (2,970 mm) |
| Engine output, gross / net | 24.4 / 23.1 hp at 2,250 rpm |
| Auxiliary hydraulic flow | 13.1 US gpm (49.5 L/min) |
Operating weights include a 175 lb operator. Imperial and metric values follow the brochure's rounding.
The cab version is 245 lb heavier in the brochure. Sellers may round both versions to the same weight class, so establish which machine they are quoting.
Record the track type and everything going on the trailer: fitted bucket, coupler, thumb, spare buckets and other attachments. Ask which items the quoted weight includes.

For example, a package with a hydraulic thumb and three buckets needs a weight for that complete outfit. Obtain an actual loaded weight before choosing the trailer, then check the vehicle, trailer and loading arrangement against their ratings.
Measure the narrowest part of the approach, including hinges, posts and changes in ground level. Measure the excavator with its attachment fitted too: a grading bucket can be wider than the machine.
Next, sketch where the tracks will stand relative to the excavation, spoil pile and nearby walls. Allow space for the rear of the machine and the attachment throughout each movement. Passing through the entrance is only the first part of the access check.

The maximum digging depth describes one endpoint of the working envelope. For a trench, check the required bottom width and the machine's setback from the edge. For truck loading, mark the truck position and required dumping height on the sketch. Those dimensions determine whether the excavator can complete the job from the planned position.
Capacity changes with the lift position. At ground level and an 8 ft lift-point radius, the canopy, rubber-track chart gives 1,870 lb over the front with the blade down and 1,280 lb over the side. The chart uses thousands of pounds, with cab values before canopy values.

A load lifted over the front may therefore exceed the side rating when the upper structure turns. Plan the whole movement using the complete chart and instructions for the machine. Check the lift point, radius, height, direction and blade position, including how the instructions account for buckets, couplers and lifting equipment. The two entries above illustrate the chart; they are not net payload ratings for an equipped machine.
Get the attachment's exact model and manual before ordering a coupler, hoses or a breaker tool. Compare its flow and pressure requirements, return arrangement, mounting dimensions and mass with the excavator's specifications.
The 13.1 US gpm auxiliary-flow figure is one part of that check. Matching hose ends or knowing that an attachment came off another Kubota is insufficient to confirm the installation.
Match the designation on the machine plate to the document coverage. Byte Market has a KX61-3/KX71-3 Workshop Manual Service Chapter, 97899-61050, and a separate KX71-3S4 Workshop Manual, RY921-23731. Check the suffix and contents before buying either.
The operator manual covers operation, lifting and daily checks. Use the workshop manual when you need a diagnostic or service procedure.
Comparing a used KX71-3S with a newer excavator? Kubota introduced its replacement, the KX030-4, in January 2023. Compare the two models' own specification sheets, including the equipment supplied with each offer.