Kubota B2650 Specs: Cab Weight, PTO Power and Loader Capacity

image

Kubota B2650 Specs: Cab Weight, PTO Power and Loader Capacity

A North American Kubota B2650 has 19.5 PTO hp and weighs 1,786 lb with ROPS or 2,293 lb with the factory cab. Used advertisements may quote either 24.8 or 26 gross engine hp; both figures appear in Kubota literature.

The specifications below cover the U.S. B50-series B2650HSD and B2650HSDC. For a tractor from another market, match the full model and engine identification to its documentation.

B2650 specifications

Specification Published U.S. reference
PTO power 19.5 hp
Transmission Three-range HST
ROPS tractor weight 1,786 lb (810 kg)
Factory-cab tractor weight 2,293 lb (1,040 kg)
Rear / mid PTO speed 540 / 2,500 rpm in the 2019 ROPS brochure
Rear hitch Category I, position control

Sources: Kubota's 2019 B2650/B3350 ROPS brochure and the Kubota B50 cab specification table hosted by Coleman Equipment. Calculate a separate transport total for the tractor and its fitted equipment.

Why do some B2650 specifications say 26 hp?

The older ROPS brochure in Coleman's B50 document, page 8, gives 26.0 gross hp. Kubota's February 2019 U.S. brochure gives 24.8 gross hp. Both give 19.5 PTO hp.

Both engine figures are labelled gross, and the brochures do not explain the difference or provide a serial-number cutoff. If it affects your purchase, have the applicable engine specification confirmed.

For a PTO-driven implement, compare its requirement with 19.5 hp. A tool requiring 25 PTO hp exceeds that output, regardless of which engine rating appears in the advertisement.

Does the B2650 have a DPF?

The U.S. B50-series B2650 has no diesel particulate filter. The model note in Kubota's brochure distinguishes it from the B3350.

When using a combined B2650/B3350 manual, read the model heading above any regeneration instructions. A section for the B3350 does not apply to the B2650 merely because both names are on the cover.

For an imported machine or one with a replacement engine, get photographs of both identification plates and confirm what is fitted.

Cab versus ROPS: transport and storage

The factory-cab tractor is 507 lb (230 kg) heavier when comparing the brochure weights. That difference describes the two tractor configurations, not the weight of a detachable cab.

B2650 tractor weight comparison: ROPS 1,786 pounds and factory cab 2,293 pounds, a published difference of 507 pounds

For transport, account for the loader, bucket or forks, mower, ballast and rear implement. Ask the seller which items are included in a quoted weight; a photograph may show more equipment than that figure covers.

Measure the tractor on its fitted tires before checking garage clearance. Include roof-mounted equipment and consider the slope of the approach. At the viewing, sit in the cab and have the seller demonstrate the heating, air conditioning and wipers. Check whether the loader or attachment obstructs the view you need for your work.

How much can the B2650 loader lift?

Check the loader plate. The 2019 brochure's LA534A table gives 1,146 lb at the pivot pin and 827 lb at 19.7 inches forward. Use the matching documentation if your loader is an LA534 or another model.

LA534A brochure lift capacities at different measurement points: 1,146 pounds at the pivot pin and 827 pounds 19.7 inches forward

For pallet forks, find the fork assembly's mass and the load's centre of gravity. Use the loader instructions to determine the permissible load at the height and configuration required. Neither figure above is a universal pallet-payload rating, and breakout force measures a different action.

A grapple needs a hydraulic circuit to open and close it. Ask the seller to identify and demonstrate the installed control equipment. If parts are missing, include the valve, hoses and attachment connection in the quotation.

Buying a B2650 with a mower

Get the mower's exact model and an inventory of its mounting and drive components. If it is sitting loose beside the tractor, establish whether the seller has the parts needed to fit and operate it. A demonstration of the complete combination is useful; photograph both model plates so you can check the documentation afterwards.

B2650 attachment purchase checklist covering model identification, mounting parts, drive components, operating requirements and included documentation

For other implements, look up the B2650 HSD/HSDC column in Kubota's B-series implement-matching chart. Read the relevant row together with the operating-condition notes at the beginning.

If you are also considering a B2601, the B2601 specification and LA435 loader guide covers that combination. Confirm part compatibility separately before moving a loader, mower or cab between models.

Workshop manual for the B2650 cab tractor

The B2650HSDC/B3350HSDC Workshop Manual, 9Y111-08221, available from Byte Market, covers the cab models. Its contents include electrical troubleshooting, hydraulic test information and cabin service material. Check the contents for the procedure you need.

For a ROPS tractor or a different regional B2650, confirm the manual's model coverage before ordering. Keep the applicable operator and attachment manuals for routine operation and setup.